Heating and cooling split systems are composed of an indoor evaporator coil, often referred to as an air handler, and an outdoor condensing unit. Both of these components are designed to work in conjunction of each other and replacing just one of these components but not the other can result in a mistake that could cost you.
Matching systems ensure that the heating and cooling unit will operate at peak performance, efficiently, increased comfort and the estimated life cycle of the system. When you install one component, but not the other it can result in the system prematurely breaking down in regards to one or both of the components resulting in the need for increased heating and air conditioning service in Plano, TX.
Additionally, whenever a new condensing unit is being matched with an old evaporator there is the possibility of the components using different refrigerants. A matched system will perform as designed, and the replacement of just part of the system will most likely end up costing you more over time than by outright purchasing a matched system in the first place. The possibilities of breakdowns, components wearing out and the frequent need for heating and air conditioning service in Plano, TX will run over the costs associated with having purchased both of the components out right.
Furthermore, mismatching is not always an option that will work with heating and cooling systems. However, when mismatching is a possibility, a mismatched heating and cooling system will likely underperform on the hottest summer days and the coldest winter nights.
Today’s, modern heating and cooling systems are much more efficient than older systems are. When a new condenser is installed with an existing evaporator it can end up having serious negative consequences, which include the possibility of total compressor failure in the worst case and the possibility of other problems also. In fact, the possibility for total compressor failure actually increases by as much as 45% during the first year after installation of a new condenser in conjunction with an older evaporator.
Additionally, aged evaporator coils can possibly fail whenever a new compressor pumps refrigerant through the aged coils. Leaks can become quite a possibility and frequent heating and air conditioning service in Plano, TX will be a necessity that will cost you more and more over time. To further compound the risks being taken, most manufacturers will not entertain the warranty when a new condenser is installed with an aged compressor. In the event the new condenser fails due to it being a mismatched system, the manufacturer may not entertain the warranty whatsoever.
Additionally, heating and cooling systems require matching for an often-overlooked component, the ducting. As an example, if your home requires a 3-ton heating and cooling system installed, you will need a ducting system that will be able to deliver 1,200 CFM, which is the amount that is delivered by a 3-ton system. An inadequate ducting system can cost you anywhere between as much as 40% in energy losses resulting in a very inefficient heating and cooling system that will cost you quite a bit month after month. If you are in need of heating and air conditioning service in Plano, TX then give Cypress Heating and Air a call today and schedule an appointment at your earliest convenience.
The problem’s that may possibly occur due to a mismatched system is realistically not worth the temporary savings one would accrue, and the same can be said with heating and cooling contractors also. When you hire a heating and cooling contractor you should make sure that they are licensed, certified and qualified to do the work that you need. Cypress Heating and Air has been serving the Katy metropolitan area for many years and we are a well-known and respected brand in the area. Our professional and NATE certified technicians have the expertise and knowledge to work on all major brands whenever you are looking for heating and air conditioning service in Plano, TX.
Many heating and cooling contractors will offer multiple brands, but Cypress Heating and Air only sells the best, such as Carrier heating and cooling systems, which are rated as one of the top system’s in the United States. Our standards of service, honesty and integrity compel us to provide the best products that are available on the market, and with that it enables us to stand behind our products with complete confidence. If you are in need of heating and cooling repairs, installations or service do not hesitate to get in touch with Cypress Heating and Air today.
About Cypress Heating and Air Conditioning
Cypress Heating and Air Conditioning in Katy has been providing heating and air conditioning service in Plano, TX to homeowners and businesses alike in Katy, Texas and surrounding areas for many years. We are one of the top heating and air companies in the area. Dedication, determination and professional services that you can rely on have helped made us the go to source for customers in the area who are in need of heating and air conditioning service in Plano, TX for repairs, installations and maintenance. When you contact Cypress Heating and Air Conditioning in Katy you can rest assured knowing that you are receiving high quality professional heating and cooling services that are both reliable and affordable.
Cypress Heating and Air Conditioning in Katy is a leader in the HVAC field servicing Katy, Plano, and surrounding areas. Our NATE certified technicians provide professional heating and air conditioning service in Plano, TX, and surrounding areas. If you are looking for help with your home or business’ HVAC system do not hesitate to give us a call today. One of our professional technicians will be more than happy to assist you and schedule a service call at your earliest convenience. Cypress Heating and Air Conditioning in Katy is a proud member of the BBB and maintains a rock-solid A+ rating.