Month: September 2019

Photo By c12 at Shutterstock

If you live in the Cypress, TX area, proper insulation is important if you want to make sure you save on those electricity bills and it’s the easiest way to be cost effective. In fact, proper insulation is one of the most efficient ways to save money because it keeps your home warm in winter and cool in summer.

If you find your home is too cold in winter despite the high temperature on the thermostat or if you feel that your house refuses to cool down in summer, your insulation system could most likely use an upgrade.

As a result, a well insulated house is energy efficient in terms of requiring very little additional heating or cooling. A lack of proper insulation implies that your heating and air conditioning system has to work extra hard to properly heat or cool your home. This is what causes your utility bills to rise. Luckily, certain home insulation practices can reduce much of this energy wastefulness. Let’s take a look at some of these practices:

Upgrade Your Windows

Generally speaking, older, single-pane windows can allow cold air to penetrate into your home, letting the hot air escape. Similarly, older homes with metal frames often experience these problems. This is because metal or aluminum frames conduct heat quickly and are substandard insulation choices.

Sliding windows are yet another problem. These have a higher air leakage rate. Upgrading to energy efficient windows can therefore reduce expensive heat gain and loss.

At the same time, keep in mind that the quality of your window installation is just as important as the type of window selected. You need to make sure that there is proper installation of the insulation surrounding your home’s windows to keep the hot or cool air on the inside and prevent it from sneaking out.

However, if upgrading to more energy-efficient double or triple pane windows does not fit your budget, you can always improve your existing windows’ insulating capacity by reglazing them or even just covering them with plastic sheets.

Seal Drafts

Drafty windows and doors are one of the greatest culprits in poor home insulation. Sealing and draft proofing your doors and windows is an important way to cut expensive drafts.

In order to find drafts in your home, you can try doing a draft test. You can do this by holding a tissue, candle or incense stick near window and door frames. If the tissue, flame or smoke moves, you know there is a draft.

If you suspect there are drafts in your home, make sure to reach out to a professional heating and air conditioning service for help because remember, the drafts will cause your existing heating and air conditioning system to be inefficient and increase your costs.

Insulate Your Attic

According to basic science, warm air always rises. As a result, installing attic insulation will keep the warm air trapped inside once it reaches the roof. In a 2015 study by the North American Manufacturers Association (NAIMA), 90% of houses in the United States are not properly insulated. Inadequate insulation will of course cause hot air to escape.

According to the US Department of Energy, a properly insulated attic can reduce your energy bills by as much as 50%. Insulation is a wise home energy investment, especially for homeowners in the cold winters in the Cypress, TX area. Adding blown cellulose insulation or batts to your attic floors and behind walls can lead to considerable energy savings because it will reduce the pressure on your existing heating and air conditioning system.

Some other areas that might benefit from proper insulation are basements, exterior walls, crawlspaces and room additions.

Replace Door and Window Screens

Screens are ideal for letting in the refreshing breezes in summer, but they won’t do much to insulate your home and save energy during the colder months. What you can do is replace your screens with solid glass panes, in late fall, before winter hits Cypress, TX.

Seal Your HVAC’s Ducts

A duct system consists of a series of tubes in the walls, floors and ceilings that deliver heated or cooled air from your heating and air conditioning system throughout your house. On average, ducts leak between 25-40% of the air that passes through them. Sealing and insulating ductwork will therefore prevent leaks that reduce your heating and air conditioning system’s efficiency and cause your energy bills to rise.

You should contact a professional heating and air conditioningservice if you suspect your ductwork requires sealing.

Flooring

Floors don’t usually require insulation. However, if your home has a crawl space, consider insulating the subfloor. This helps with energy efficiency and better indoor air quality (IAQ). Furthermore, homes with older wooden floors may have gaps in them. These games may need to be filled up with wood strips, rope or putty to prevent drafts.

Hang Curtains

Heavy curtains placed over windows can act as an extra layer of defense against cold air drafts. Alternatively, you can even use cellular shades. These are window coverings designed to insulate windows and filter sunlight, while adding warmth during daylight hours.

Place Weather-Stripping Around Your Doors

If you feel a draft coming through the bottom of your exterior doors, you can opt for foam weather stripping. Foam weather stripping offers an affordable insulation solution by creating a protective seal around your doors that will keep the cold air out and the warm air in.  Make sure to contact a professional heating and air conditioning service to find out more about weather-stripping.

Keep your home better insulated with the smart options we have listed here. Remember, the better insulated your home, the better your HVAC system can work and the lower your energy costs. Poor insulation puts undue pressure on yoursystem, forcing it to work extra hard to heat or cool your home.

For more information on insulation and its’ impact on your HVAC system, don’t hesitate to call Cypress Heating and Air. We are the most efficient and the most trustworthy heating and air conditioningservice in the Cypress, TX area.

We cater to all your heating and cooling needs. So don’t hesitate to contact us at 972-278-3506 and get your heating and cooling problems resolved today!

Photo By LightField Studios at Shutterstock

Are you a Katy homeowner thinking of buying a new air conditioning system? When investing in an air conditioning system for your home, you want to make sure you invest in the most reliable and efficient system possible. Ductless heating and cooling systems are becoming increasingly popular over the years. Regardless, many homeowners in Katy still don’t know much about this dependable and cost-effective technology. Here are some frequently asked questions about ductless air conditioning systems and their answers:

What Is a Ductless Air Conditioning System?

A ductless air conditioning system is a type of electric heating and cooling system that can control the temperature in your Katy home without needing ductwork. The system comprises of an outdoor heat pump (the condenser) and indoor air handling units (the evaporator) that can be mounted on the wall or within the ceiling.

Ductless AC versus Traditional AC: What’s the Difference?

The main difference between a ductless AC and a traditional AC system is that while a traditional AC system connects to your home’s ductwork to distribute cool air, a ductless AC system sends cool air to a box that mounts to a wall or ceiling in a room. Each area of your house is equipped with an individual air handler, which in turn controls heating and cooling output within that space.

How Are Ductless AC Systems Installed?

Ductless AC systems can be installed much more quickly and easily than a traditional AC system. The outdoor air handler of a ductless AC system is connected to the indoor air handling unit by a component called the line set. A hole of approximately 2 to 3 inches in diameter is drilled into the exterior wall of your house so that the outdoor unit can be connected to the air handler.

After the hole has been drilled, the outdoor unit will be mounted to your house and then the air handler will be mounted inside your home, near the ceiling. Lastly, a conduit that contains the refrigerant line, a power cable, and a condensate drain will connect your indoor and outdoor units

How Do Ductless AC Systems Work?

In summer, the air handler takes the warm air in your home and passes it over evaporator coils that are filled with refrigerant. The refrigerant then absorbs heat from air and directs this to the outdoor unit and out of your house.

In winter, the opposite happens. The outdoor unit absorbs heat from the Katy air and then passes this air refrigerant line to your air handler. This will blow the warm air into your home.  Heat transfer is what makes a ductless air conditioning system work. In summer, hot air is transferred out of your house while in winter, it is transferred into your home.

How Are Ductless AC Systems Controlled?

Ductless Ac systems have a built-in control panel on the air handler to adjust settings and temperatures. Most models even include a remote control with each air handler, allowing you to adjust the unit’s settings remotely. Unlike traditional AC systems, ductless AC systems do not make use of traditional thermostats.

Are Ductless AC Systems More Efficient than Traditional AC Systems?

With traditional air conditioning systems, about 30% of energy is lost in the cooling process. This is because traditional AC systems make use of ducts.  By eliminating ducts, ductless AC systems can save you up to 30% on your cooling costs instantly! Furthermore, ductless Ac systems also make use of high-efficiency components to further conserve energy when cooling your home.

What Is the Lifespan of a Ductless AC System?

Just like a traditional AC system, the service life of a ductless AC system varies based on factors such as usage and maintenance. With good maintenance, you can expect your ductless AC system to last up to 20 years.

What Is Zoned Heating/Cooling?

A crucial difference between traditional and ductless Air conditioning systems is that ductless systems are capable of something known as ‘zoned heating’. This basically means that you will heat or cool your room one at a time instead of controlling the temperature of your entire house.

With a ductless system, you will need to install an air handler in every room that you’ll heat or cool. The rooms where you decide to install your air handlers will be your zones. Heating or cooling your house in zones can be advantageous in terms of comfort and energy costs.

If there are certain areas of your house where you don’t spend much time, you don’t need to install an air handler in those rooms. This way, you won’t be wasting money cooling an empty area as you would with a traditional air conditioning system.

Moreover, this allows everyone in the house to enjoy their preferred temperature since there is a different handler in each room.

What Are the Advantages of a Ductless AC System?

  • They are ideal for older homes without ductwork. Installing ductwork is inconvenient and messy.
  • They generally cost less than traditional Ac systems.
  • They are more secure and convenient than window ACs or portable ACs.
  • If noise bothers you, you will be happy to know that ductless ACs are far less noisy than traditional AC systems.
  • They are far more energy efficient than traditional systems.
  • If your home has areas that are more difficult to heat or cool, a ductless system is a less expensive way to get a zoning system.
  • They are less destructive to install in your house. All you need to do is to drill a tiny hole in the wall.

What Kind of Maintenance Do Ductless AC Systems Need?

Ductless AC systems need the same sort of maintenance as a traditional AC system. Ductless systems have a filter that should be replaced when it gets dirty. How often they need replacement depends on how often you use your AC. Usually, once or twice a season should be okay.

 

If you’re considering a ductless AC system for your Katy home, we at Cypress Heating and Air are here to help you. Don’t hesitate to contact us at 972-278-3506

Photo By Paul Biryukov at Shutterstock

Fall is here in Cypress, TX. The leaves have started turning red. Winter is officially on its’ way and it will be here before we know it. While on the one hand, you need to make sure that you get your winter wardrobe is ready well in time, you also need to ensure that your Heating, Ventilation and Air Conditioning (HVAC) is ready to face the winter cold.

The primary purpose of an HVAC system is to make sure your home is comfortable throughout the year. It achieves this purpose by ensuring that the temperature in your home is relatively stable throughout the year.

It would be an absolute nightmare if your HVAC were to break down in peak winter time, when you need it the most. In order to avoid that hassle later, here are certain steps to ensure that your HVAC is properly functioning when you need it the most.

Remember to not attempt any of these steps by yourself and to contact a professional heating and air conditioning service to help you.

1.  Replace Your Air Filter

Summertime in Cypress, TX is usually hot and temperatures can easily exceed 90 degrees. Hot temperatures imply that your air conditioner will probably run all day, in order to maintain a comfortable home temperature. Constant use of the air conditioner can make your air filter very dirty.

A dirty air filter disturbs the flow of air, forcing your HVAC system to work extra hard, causing inefficiency and higher utility bills. It is therefore recommended to have your dirty filters replaced with clean ones well in advance of winter.

If you suspect that your air filter needs to be replaced, don’t hesitate to contact a professional heating and air conditioning service today.

2.  Clean the Vents

Persistent use of the HVAC all summer implies that dust and debris can often build up inside the system. It is recommended that you check all of your HVAC vents for signs of dust and debris in late October, well before the start of winter.

The outdoor units of your HVAC system are particularly susceptible to the detrimental effects of the elements.

All through summer, your HVAC will get covered in twigs, pollen and even grime, blocking the air flow to your system. This problem is made worse during fall. The leaves falling from the trees in autumn might be visually appealing but can be dangerous for your HVAC system. In fact, some leaves can even get stuck in the external part of your HVAC, posing a fire hazard.

Your goal should be to make sure that your HVAC continues to function properly, in spite of changes in weather.

Even 1/100thof an inch of dust buildup on your blower motor and coil can leads to a 10% efficiency loss, understandably raising your electricity bills.

Contact a professional heating and air conditioning service to have your system’s dust and debris cleared off before the start of winter. (Ideally late October)

3.  Check Your Home’s Insulation

Ideally, your home remains well insulated throughout the year, allowing your HVAC to function at its optimum. A well insulated house makes efficient use of energy, resulting in lower utility bills for you.

Over time however, drafty doors and sliding windows can mean that your home is no longer properly insulated, allowing hot or cold air to escape. As the air escapes, your HVAC will have to work harder to heat or cool your home.

If you notice a sudden upsurge in your energy bills, it is time to speak to a professional heating and air conditioning service so they can inspect your system’s insulation.

4.  Check Your Furnace

Late October or early November is the ideal time to check your HVAC’s furnace and make sure it’s working properly.

The first thing you should do is to check for any dust that may have gathered all throughout the summer season. The next step is to test the furnace itself.

Remember that it may take time for your HVAC to adjust to drastic seasonal changes. If your HVAC was giving off cold air, it may take a while for it to adjust and start giving off hot air.

You need to be patient with your HVAC system at the start of winter. Turn the heater on to a low setting and increase it gradually .Keep in mind that you may have to be patient with it

If after waiting patiently, you still suspect that your furnace is malfunctioning, don’t risk waiting. Contact a professional heating and air conditioning service today!

5.  Check the Thermostat of Your HVAC

Checking the thermostat of your HVAC is an important way to check whether or not the system is being overworked.

If the thermostat shows an accurate temperature reading, then you know that the system is functioning properly. If not, you know you need to get it fixed before peak winter.

6.  Regularly Maintain Your HVAC

Regular maintenance of your HVAC is likely to reduce the need for constant repairs by extending the life of your unit. Not only will you be spending less on repairs, but a well- functioning HVAC is also likely to lower your utility costs.

As important as regular HVAC maintenance is, never attempt this maintenance by yourself. Only a professional heating and air conditioning servicecan inspect your system and tell you whether or not it is ready for winter.

If you want to find out more about how to prepare your HVAC well in time for winter, don’t hesitate to call Cypress Heating and Air. We are the most efficient and the most trustworthy heating and air conditioning service in the Cypress, TX area.

We cater to all your heating and cooling needs. So don’t hesitate to contact us at 972-278-3506 and make sure your HVAC system is ready for the new season!

Photo By New Africa at Shutterstock

Heating, ventilation and air conditioning (HVAC) systems are an integral part of homes and offices. They are not only important for maintaining the temperature, but also help in improving the overall air quality. In cities like Cypress, TX, where the average temperature in summer is over 86°F, HVAC systems allow us to maintain comfortable indoor weather. Similarly in winter, a functioning HVAC system will ensure that we enjoy the warmth and coziness of our homes.

Considering the weather in the Cypress, TX area, there is an inevitable need for HVAC systems. However, many problems can arise. This is why heating and air conditioning repair is crucial. Some of the most common heating and air conditioning problems which need repair include the following:

Refrigerant Leak

Refrigerant leak is one of the most common problems that can occur in HVAC systems. One of the potential causes of a refrigerant leak is wear and tear, which takes place over a period of time. Another possible reason is lack of regular maintenance.

Refrigerant is a gaseous or liquid compound used in almost all HVAC systems. It absorbs the heat from the environment and transfers heat from one area to another. Therefore it is essential that an adequate quantity of refrigerant is present in the system.

A refrigerant leak can lead to loss of the coolant present in the HVAC system. Inadequate volume of refrigerant in the system can affect its ability to function properly, and immediately need heating and air conditioning repair.

Only a technician from a reputed company can help identify the location of the leak. Once identified, a refrigerant leak can be repaired by the technician. If this is a frequent concern, you might need a new HVAC system.

Dirty Filters

If your HVAC system is taking too long to cool the house, you might have dirty filters. Filters are placed in the HVAC system to ensure that the air which flows into the house is free of all types of solid particles. Clean filters improve the functioning of your HVAC system, and also help reduce your energy cost.

Since filters capture dust and other solid particles, they tend to get dirty over time. As a result, your HVAC system does not operate at the optimal level.

However, you can solve this problem on your own. You don’t need assistance from a heating and air conditioning repair company. Instead, you can clean the filters on your own. However, filters often need to be replaced. Only a professional can guide you on when to change the filters of your HVAC system.

Thermostat Malfunction

Thermostat is one of the most important components in the HAVC system. It regulates the timing and volume of warm or cool air which your HVAC system must produce. If there is a problem with the thermostat, it can affect the temperature in your homes or offices. If not treated well in time, it can cause serious damage to the compressor of your HVAC system.

Often times, an issue with the thermostat is considered as an issue with the HVAC system. An average person cannot differentiate between a thermostat malfunction and a HVAC system failure. Only a heating and air conditioning repair professional can help you identify the exact problem.

Strange Noise

HVAC systems installed in homes and offices have a low noise level. You might notice some noise due to circulation of the air. However, if there is any unusual noise in your HVAC system, you might need heating and air conditioning repair.

If you notice any unusual grinding, churning, or rasping sounds in your HVAC, it might be an indication of some loose parts in the system. It can also indicate that the belts and bearings in the system are wearing out. If you ignore these sounds, you might end up damaging your HVAC system. Therefore it is vital to contact a heating and air conditioning repair professional to fix this concern. It might cost you, but it will help you save your HVAC system in the long run.

Sensor Problems

Air conditioners installed in homes have a thermostat sensor which is located right behind the control panel. The function of this sensor is to the measure the temperature of the air flowing into the evaporative coil. If the sensor is not in the right position, the air conditioner might behave unpredictably. Either the air conditioner would run constantly, or might stop suddenly.

Ideally, the sensor should be placed near the evaporative coil but should not be touching it. If you notice any unusual change in how your air conditioner functions, you need heating and air conditioning repair in your home or office

Need Heating and Air Conditioning Repair?

If you need any type of heating and air conditioning repair for your home or business in Cypress, TX, contact Cypress Heating and Air Conditioning. We offer all sorts of HVAC solutions. Our expert staff is available 24/7 to make you and family comfortable again. With a history of over 60 years, we try to give the best to our customers. We also offer exclusive discounts on HVAC repair and maintenance. To know more about our services, call now at 972-278-3506.

Photo By fizkes at Shuttertstock

Outdated appliances are always at risk of damage or collapse, but some of these can even threaten your health.

One of these appliances is a heater which requires a constant check. This article will list 9 signs that indicate your furnace is in need of immediate attention.

1.  Cold Spots in Your House

One of the most prominent things a heater exhibits when it is not working to its optimum level is cold spots. In order to use this method to further investigate the problem, you can walk around your house to look for certain spots where there is no heating even when your appliance is at work.

On the other side, if you feel a lot of heat in some places of your house, that too is a sign that your appliance is not working properly and should be sent for a repair.

2.  Dangerous Gas Contamination

This is one of the most important signs to lookout for as it can affect your health and wellbeing. Ageing heaters might produce carbon monoxide when cracks appear in the heat exchanger. This can cause household members to experience flu like symptoms.

Therefore, gas contamination caused by heaters should never be ignored.

According to the National Fire Protection Association, heating equipments are one of the leading causes of fire in US residences. In 2016, more than 50,000 incidents of fire due to heating equipment were reported in the country. Hence it is advisable to take precautions in the winters.

3.  Changes in the Burner Flame

Another smart hack to detect gas in the heater early on is to notice the change in the color of the flame from blue to yellow. Needless to say, a carbon monoxide contamination can prove fatal for you and those around you, especially at night.

This is because one can inhale the dangerous gas during their sleep without even realizing it.

4.  Foul Smell from the Appliance

As soon as you switch your heater on, the heater gives off an awful smell which won’t go away with time. Do not ignore any burning smell that may last for even a few hours as that can even end up causing a fire.

This can aggravate to a major incident, such as a gas explosion or a serious skin injury to any of the household members.

5.  Clanking Sound

Many heaters begin to make some noise as they are used frequently. However, if it’s producing a clanking sound or a loud sound, then it will need to be inspected at once. Clanking can be described as a sharp sound of metals striking together.

6.  Hike in Power Bills

When the heater is not working correctly, you will notice a significant increase in your electricity bills. To check if that’s the case, you can switch on your heater and inspect your meter for any irregular raise in the numbers.

If the appliance is the culprit behind the increased bill, you need to replace it.

7.  Frequent Thermostat Adjustments

If your thermostat is in need of constant adjustments, it can be an indication that there is something wrong with your heater. This can primarily happen when your appliance is not able to circulate air properly.

Your heater may require a major repair if it is unable to distribute heat to all areas of your house evenly.

8.  Faulty Regulator

When the heat exchanger overheats, it may cause the system of the appliance to shutdown frequently. This short cycling can seriously affect the ability of your furnace to work efficiently.

Hence it is mandatory to pay special attention to the regulator of the heating system.

9.  Frequent Repairs

It goes without saying that if your heater has had several repairs in a short amount of time, it should be replaced. The cost of such repairs is sometimes equivalent to the price of a new heater. This is because the parts of an ageing heater are usually difficult to find.

Age Expectancy of Heaters

The life expectancy of a heating system is usually 15 to 25 years. One smart hack to find out the age of your heater is to note if it has a pilot light.

If that is the case, your heater has completed 25 years and you need to look for a new one.

When to Repair Your Appliance?

A smart hack is to upgrade your system before the start of the winter season. This is because repair services are mostly acquired at the peak of the season, and that’s when they can cost more.

Remember to look for a professional and experienced repair company to fix your appliance.

Professional Services for Repair

Repairing your heater on your own is not just difficult but it could also spell trouble for you due to several hazards. Hence it is important to seek assistance of a professional heating company for a satisfactory service. Cypress Heating and Air Conditioning has skilled technicians to repair or replace your heater.

The company is experienced in providing heating, cooling, repairs and air quality services at your doorstep. Cypress Heating and Air has been assisting its customers in Texas for past more than 60 years. It also offers to provide emergency assistance 24 hours a day, 7 days a week.

Conclusion

The repair of a heater requires special precaution because there is always a risk of carbon monoxide leak. Faulty heaters not just cost more money but fail to serve the purpose of keeping your rooms warm. So if you have a heater showing any of the above signs, now is the time to have it replaced!

Photo By Sergey Nivens at Shutterstock

Your heating and air conditioning devices need care and attention. You have probably spent a lot of money buying them so you would expect them to last for a significant amount of time.

For machines to keep running smoothly, you are supposed to get them inspected and repaired regularly by trained service providers. You may contact Benjamin Franklin Plumbing Houston for preventive maintenance of your units.

There are countless service providers for heating and air conditioning service. It is essential that you make an informed and well-thought decision. Keep reading to know about 11 tips that will help you choose the right service provider for heating and air conditioning service in the the Katy, TX area.

1.  Research

First of all, conduct thorough research on your units. You should be well-aware of the type, make, manufacturer, and maintenance history of your units.

It is always better to not come across as a complete newbie when it comes to repair and maintenance. It is best to know as much as you possibly can about your units.

2.  Ask Around

In this day and age, the significance of word of mouth cannot be ignored. When choosing a mechanic, a plumber or any service provider for that matter, ask the people around you; this includes your neighbors, relatives, friends, or even someone you met at the park.

A quick online search for heating and air conditioning service may do the job as well. However, don’t trust all the reviews you see on the service company’s website, some could be fake.

3.  Experience

Filter out the top three companies of your choice for heating and air conditioning service. Then research on the experience level of their staff.

The best way is to thoroughly go over their website. A well-maintained website reflects well on the company’s profile. Check out the blog posts and articles on Cypress Heating and Air website.

Find out about the problems the technician has dealt with before. This would give you an idea if he is suitable enough to handle your heating or air conditioning unit.

4.  Legal Compliance

Always hire a licensed service provider for heating and air conditioning service the Katy, TX area. Most service providers show their licenses before they begin working; ask for one if they don’t.

Cypress Heating and Air only has licensed workers on board which makes it a trusted place for your units.

5.  Look Up For References

This may sound intrusive but you can also ask the company of your choice to give contacts of some of their previous clients. Don’t worry if it is a pretty common practice.

The company may give you a list of only their satisfied clientele. You can give them a random alphabet and tell them to give you the names of people whose names start with that letter only.

Ask those customers questions about the duration of the service, charges, their overall experience, and whether they recommend it to other people.

6.  Communicate Your Requirements

Communicate all your concerns to the company on your first call. Be crystal clear. Do you have a budget? Tell them. Do you want your issue to be resolved urgently? Be clear on your timelines.

7.  Go Green

Some homeowners are concerned about the effect the service is going to have on the environment. This is why they prefer environmental friendly practices.

Cypress Heating and Air uses the most environment-friendly methods for heating and air conditioning service.

8.  The Cost

Ask for a written, itemized estimate from your contractor. People often get disappointed when they find out that the expense is not what they initially had expected. So, as we mentioned before, let your service provider know about your budget to avoid disappointment in the future.

However, please keep in mind that some repairs are costly. So, even if you are spending money, know that it is for your own good. Also, don’t always fall for the cheapest rates. You don’t want your heating or air conditioning unit to be mishandled.

9.  The Payment Schedule

If your air conditioning unit requires some major repairing, the bill is going to be big. Cypress Heating and Air offer its customers very flexible payment schedules. However, if your job requires some expensive materials, the contractor will always ask for a deposit. For instance, compressor replacement companies ask for money upfront.

10.  Work Together

Your service provider should make note of some important factors about your house such as its layout, square footage, insulation system, and more. We advise you to work along with him and be well aware at every step of the task.

So, look for an expert for heating and air conditioning service in the Katy, TX area who does not mind your presence around him. There are workers who get irritated which we believe is a red flag. We assure you that the workers at Cypress Heating and Air are not like that.

11.  A Written Proposal

After choosing a contractor, get a proposal in writing. Do not miss out on any hidden clauses. Read the entire paper carefully and ask questions. Typically, a project proposal contains elements like charges, warranty information, etc.

We hope you found these tips on finding the best resource for heating and air conditioning service in the Katy, TX area useful. To finally bring your search to an end, call Cypress Heating and Air on 972-278-3506. Call us once and you won’t be disappointed.

Photo By Macklin Holloway at Shutterstock

In case you are thinking that your AC unit being covered in ice would make the air cooler in your home or office, you couldn’t be more wrong. The functioning of an air conditioner requires a certain balance of pressure, air flow and temperature. When any of them gets out of control, the refrigerant system that produces the cool air tends to overwork itself and gets frozen on its own, but it doesn’t make the air any colder.

You’d notice that if your air conditioner gets frozen, it blows out either warm air or absolutely nothing. Bearing with the heat in Cypress, TX can be agonizing so it’s best to get hold of an air conditioning service. But you if you’re curious about this phenomenon, we’ll tell you why it happens in the first place.

How Does the AC Produce Cool Air?

The coil is the most crucial part of the AC, which is filled with the cool refrigerant. When the coils are operational, the refrigerant needs to blow heated air over the coil. Doing so makes the air cooler and also allows the coil to stay warm so that they don’t get frozen. The indoor coil withdraws the heat from the air inside which is carried away by the refrigerant to the outdoor coil and then heat gets pushed outside. You’d be able to feel that the outdoor unit blows hot air as the extra heat gets transferred by the system from the inside to the outside.

This happens through the manipulation of pressure through the refrigerant circuit. The coils get cold and freeze up when either the warm air gets obstructed by anything and is unable to blow over the coils or in case the pressure inside the coil is less than optimal. So, when the insides of your AC start to ice up, you should turn to an air conditioning repair service and they’ll fix the problem that lies with the pressure or airflow, or perhaps both. Let’s go through the details for each of them.

Moisture Makes the Situation Worse

High humidity levels tend to worsen the problem of a freezing AC unit. The ice formation on the coils insulates it making it impossible for the warm air to get to them. Higher moisture content in the air promotes excessive ice buildup. The AC looks similar to a deep freezer as the insides get covered with ice and gradually creeps up the copper pipes. You’re more likely to notice this during the monsoon season, when the ice crawls up the copper pipes reaching towards the outdoor unit.

Airflow is Lacking

Lack of airflow is one of the most common reasons why your air conditioning unit might be freezing up. This can be due to several different parts malfunctioning, which ranges from the air intake to the blower motor. If the compressor keeps running while something in the airflow is blocking the warm air to flow over the coils, the unit would begin freezing up and it would grow worse over time.

Duct Has Collapsed

The ducts are designed to allow airflow within your place. But if the ducts get blocked by anything, the airflow would be obstructed and eventually lead to blockage of air to the coils. In case the air duct system of your place collapses or is blocked, the AC unit would lose the airflow, despite the fact that the remaining system is functional. Due to the absence of enough warm air, the ideal temperature can’t be maintained and as a result the coils start freezing. You can call an air conditioning service for a duct cleaning service at your place.

Blower Motor Has Stopped

A lot depends on the blower motor to keep the system running well. Be it the spinning motor itself or the blower motor’s run capacitor, when the blower fan comes to a halt the air won’t flow as fast over the coils as required. So when the air doesn’t flow over the coils, they start to freeze. An indication of a deteriorating blower motor is when you start to hear an unusual or rattling noise from the AC unit. Get it fixed by an air conditioning repair service company.

Fan Isn’t Receiving Enough Voltage

At times, low voltage could be the one to blame. The various high-power components inside the AC need electricity to function, that’s why you tend to notice a hike in your electric bills during the summer season. An airflow problem might be created when the fan or the blower motor run on low voltage and the compressor continues running, causing the unit to build up ice. Get the wirings of your unit checked by a professional to avoid this issue.

Air Filter Has Clogged Up

Although you can miss out checking up on the AC air filter, it shouldn’t be ignored for too long. The air intake filter keeps the air clean as it’s strategically placed between the AC unit and your dirty home vent. Overtime the filter can accumulate dust over itself that can get clogged up. It hinders the pathway of the airflow causing the airflow to slow down. Despite an efficient blower motor, the coils are bound to get frozen. You can get an air conditioning service to clean them for you.

Blocked Coils

Whether you’re lazy about replacing your air filter, using a low quality air filter or none at all, it can get risky. The damp air condensing on the cold surface makes the AC’s refrigerant coils moist. When the air passes through the damp coils, the dust in the air gets deposited and forms a thick cover over them. The dust works as an insulator as it traps the cooling in the coils in itself, producing an unnecessary amount of cold air. This gets along with more moisture that builds up on the dust producing an ice-box effect. To protect the refrigerant coils of your system, call an air conditioning installation and get high quality air filters installed or replaced.

Low Refrigerant Levels

The AC controls the pressure with the help of the refrigerant inside the coils, which is why it is important to have the right level of refrigerant at all times. The outdoor unit compresses the refrigerant after the collected heat is released. Liquid refrigerant heats up and releases pressure when it’s converted into gas by warm air. It’s compressed to a liquid back again and pushed forward to the blower fan inside with the help of the condenser.

In case of low levels of refrigerant, the flashing occurs too soon as the pressure is lacking, creating enough cold to condensate moisture on the coils that freezes immediately. Early occurrence creates higher ice buildup filling the AC and then crawling up to the copper pipes. So, whenever you contact an air conditioning repair service for maintenance, make sure they check the refrigerant levels.

How to Deal with Ice on the Condenser

If you notice ice buildup on the outdoor unit of your AC, shut down the thermostat without further ado. Doing so would turn off the compressor and let the refrigerant to stop getting colder. Remember to leave the fan working when the AC is turned off. The fan would allow airflow and assist melting of ice.

Be quick to contact professional air conditioning repair service in the Cypress, TX area and handover the situation to them. As it can result in a permanent damage of the system until the source is detected and fixed. You can hire Cypress Heating and Air as they’re the most reliable service providers in the Cypress, TX area. They’ll be quick to reach at your doorstep to fix the issue as they’re available 24/7.

Photo By tommaso79 at Shutterstock

The scorching summers in Katy, TX can get truly unbearable at times. We’re sure you don’t want your heating and AC unit betraying you at that moment. Finding yourself in this situation could be completely disappointing. So it’s normal for you to be worried about your AC not cooling or the high electricity bills.

But worry no more! We’re here to guide you through so you can enjoy a pleasant summer at your place. With the help of frequent air conditioning service and avoiding these mistakes, you can chill out this summer.

The AC Unit is Not the Right Size for the Room

It isn’t necessary that if an air conditioner is unable to cool down the room properly, it’s due to a problem. At times, the mistake has already been committed even before you called the air conditioner installationcompany. Every air conditioner unit is designed keeping in mind a certain amount of air space. If the room is too small or too big for the unit, it won’t be able to work effectively.

The window air conditioner units come with a British Thermal Unit (BTU) rating that normally ranges from 5000 to 15000. As a general rule, remember that for each square foot of the room space you require 20 BTU, additional 600 BTU for each person that usually inhibits the room. In case the room gets plenty of sunshine or has high ceilings, etc, you need to get raise the units BTU by an extra 10 percent.

If you’re thinking of getting a system that’s bigger, it won’t be such a good idea. The issue is that even though an outsized unit would pump out plenty of cool air, but it would in turn make the room humid as you won’t have to keep it on for a long time. The room might feel stuffy and hotter than it really as because of the humidity.

You Keep Delaying to Change the AC Filter

Your room might seem very nice and tidy to you, but you can easily miss out the particles moving around in the air. When your air conditioning unit is operational, these particles get sucked in and get accumulated. That’s why all the AC units come with particle filters that stop these particles from messing up with the internal system.

If you want your AC to work efficiently, you must make sure that the filter is clean and clear at all times. As particles get deposited, they hinder the airflow, due to which the unit has to put in more effort to pull in the same level of air. With an unclean filter you’d find your electricity bill increased by almost 15 percent.

You’re advised to get the filter replaced by any air conditioning service no later than once a month, it your AC is functional throughout the day each day. Otherwise changing the filter once after a three month period would do if your usage isn’t that frequent. You can rinse and clean the filters with water if your unit has removable filters. If not, get hold of replacement filters as per the requirement.

You Don’t Clean Up in Between the Seasons

It’s quite normal for condensation to form inside the AC as a result of daily operation. The newer and carefully thought-out models are built in such a manner that they can clear out the condensation before it develops into a major problem. This is why the older window ACs keeps dripping continuously.

If the air conditioner is working fine you don’t need to get bothered, as the condensation would run off and drip out by itself. However, if there’s a problem, you’d find the condensation pooling up. This serves as a breeding ground for mold and bacteria. You shouldn’t ignore this issue and get hold of one of the air conditioning service as soon as possible.

These mold and bacteria can become airborne as the air conditioner operates by letting out cool air in the room. It can expose you to several health risks, such as pneumonia, black mold invasion, asthma and maybe Legionnaire’s disease.

That’s why it’s essential that you hire an air conditioning service in the Katy, TX area for cleaning and maintenance before the beginning of each summer and winter seasons.

You Continue to Ignore AC Maintenance

The secret to a long-lasting air conditioning unit is routine maintenance. With regular maintenance you’d be able to keep the machine running in mint condition. This would limit the energy usage as the unit would cool the room at a faster rate and in a more efficient manner.

You can let it go if your pocket doesn’t allow you to get it checked on an annual basis. But in case you notice things going wrong with it, it won’t be a good plan to continue ignoring them.

Whether you hear weird noises, such as internal dripping or grinding or are experiencing an unusual smell in the room, you need to get an inspection done. Even when you notice black growths or a liquid leaking, it’s best to get it checked by an air conditioning service.

You’d be better off by hiring an air conditioning service company the in the Katy, TX area and getting the issue checked and resolved sooner. It’ll cost you much less than getting a brand new unit installed once the old one breaks down.

Conclusion

By now, you must’ve understood that you not only need to get the right sized AC unit by also keep it well maintained. So, don’t forget to schedule your maintenance with Cypress Heating and Air for the best and most efficient heating and air conditioning service in the Katy, TX area, before the heating season arrives.

Photo By lightwavemedia at Shutterstock

Living in Katy, TX, you need your air conditioning system to function smoothly without running into any sort of issues. To ensure that the AC unit operates efficiently, you need to make sure that you call in air conditioner repair service regularly for maintenance.

Like all other electrical appliances, it’s expected that the air conditioning system would go through a little wear and tear with regular usage and a few technical issues might come up later on as time passes.

You need to pay proper attention to the maintenance and service requirements of the unit, for it to stay in working condition and function properly. You’d save more money if you scheduled maintenance visits from your air conditioner repair serviceat least once to twice a year. That way it’s less likely that your AC unit would have an unexpected breakdown.

We’ll cover everything that will help you keep your air conditioning unit in perfect condition. You’ll also be able to figure out when you need to call in air conditioner repair service.

Understanding the Workings of an Air Conditioner

If you have only used fans or window ACs in the past, it’s possible that you have never dealt with a central air unit before. But now you’re looking for air conditioner installation so you can get a central AC system for your place as well. It’s a good idea to gain some knowledge about it before you move ahead.

It operates in a similar manner to that of a refrigerator but on a bigger scale. Basically, the air conditioning unit changes gas to liquid and once again to gas, making use of chemicals that remove the heat from the air, letting it out of the room.

Do You Really Need AC Maintenance?

You need to give the same sort of care to your AC unit that you give to your car for it to function efficiently. If you’re regular with its maintenance you’d be able to prolong the lifespan of your AC unit. Owning a well-maintained system would help you save a significant sum of money spent on getting it fixed or replaced. If you hire an air conditioner repair service in to even just replace the air filters, you’d notice the difference in air quality and it will eventually boost its performance.

Remember to Turn off the Power Supply to the AC

In case you’re getting a heating and ac system repaired or installed, the first thing you need to do is to shut off the power supply to the unit. Turning off the power supply to the AC unit is necessary because you don’t want yourself or the person you’ve hired for the job to get electrocuted. It also protects the equipment and the system itself. Be sure to check if the system is shut, by trying to turn it on from the thermostat.

Learn to Clean the AC Condenser Unit

In order to preserve the investment you’ve made in the air conditioner and ensure its efficiency, you must clean the outdoor condenser unit every year. You’re free to do the cleaning of your unit in your backyard on your own. But if you’re struggling to find the time or space, it’s better to hire an air conditioner repair service to do the cleaning. It’s becomes more important that you clean the condenser, if you’ve placed your unit where leaves or weeds are likely to get stuck in it.

Ensure That the Condenser Unit Is Leveled

Although it’s much of a challenge to move your air conditioning unit, but in case the unit is not kept leveled, it would be unable to work well and result in leakage of the refrigerant. We advise you to check at least one time each year, if your unit is leveled.

Learn to Clean the Evaporator Coil

Evaporator coils in the AC unit are vital to keep your place cool. They’re job is much more than just cooling things up, they’re responsible to eliminate moisture from the air that creates humidity. As the coils become damp from the condensation, the dirt and dust gets collected making them dirty. The AC unit struggles to work efficiently once the coils become dirty, but you can clean them easily.

What to Do in Case of a Clogged Condensate Drain Line?

The moisture from the unit is removed with the help of the condensate drain line. It stops the moisture to buildup in the coil keeping it away from the unit. As the drain line remains wet the whole time, its serves as a breeding ground for mildew and mold, that can make the drain to get clogged. In case this happens, you should hire a good air conditioner repair service in the Katy, TX area to fix things up.

Learn to Change the Blower Filter

The air filter in the air conditioning unit can get covered with dust over time. It’s surprising the amount of dust that gets deposited on the filters in a short amount of time. If you don’t clean the air filters of your AC unit, it might not function as well as you expect it to. So, you should change the filters on a regular basis. It’s an easy job that you can do by yourself, this would make the unit more efficient and improve the air quality.

Programmable Thermostats for Adjusting Home Temperature

We advise you to call an air conditioner repair service in the Katy, TX area to get a programmable thermostat installed at your place as well. If it’s arranged in a proper manner, it’ll help to keep the home comfortable by adjusting the temperature automatically all day. This investment would help you to save money and manage the cooling of your place.

Time to Let the Professionals Handle the Situation

Like we’ve mentioned before, you need to give regular maintenance and service to the AC unit for it to function without any having any sort of glitches. Although you can fix many of the issues on your own, it is not recommended as you may cause more harm than good. For proper maintenance, you should contact Cypress Heating and Air. They are a highly recommended air conditioner repair service in the Katy, TX area.

Photo By adriaticfoto at Shutterstock

Is your air conditioning system malfunctioning? If this is the case, then the chances are you have thought about replacing it. And like many others, you might have thought about doing it yourself. There are many reasons why people shy away from calling professional help, but the most common one remains money. People try to save money by attempting to install their air conditioning system themselves, but they do not know that this attempt at saving money can often backfire. A small mistake in the installation can often cost you much more in the long run. So unless you are a skilled professional at installing air conditioners, you should refrain from doing it yourself, and ask a professional’s help.

Below we have stated all the advantages of hiring professional help for air conditioner installation in Cypress, TX, in case the above-mentioned reason doesn’t cut it.

•  Proper Measurements and Size

Prior to the process of air conditioner installation in Cypress, TX, there is a lot of other work that needs to be done and a lot of other procedures carried out to ensure that the unit is installed without a hitch. One of them is that the air conditioner needs to be powerful enough to efficiently cool the room it is being installed into. Secondly, you should check if the existing ductwork could be used to connect the air conditioner. A professional can do all this with ease and in much less time than you would.

•  Efficiency And Life Span

The process of air conditioner installation in Cypress, TX, involves much more than just getting it to run. If you do it on your own, you might get it in working order, but it may not work as efficiently as it should. There are many tiny things that you might not know of. Ignoring these will result in you compromising the efficiency of your new unit. Many times, this causes increased electricity bills. You will eventually have to call for professional help unless you are fine with paying the extra amount. This is why you should get a professional to install it and avoid all this hassle.

·  Guarantee by the Professional

Professionals of air conditioner installation in Cypress, TX are licensed and insured and will always offer you a guarantee of their installation or repair. On the other hand, you get no such assurance if you install or repair the unit yourself. While professionals of air conditioner installation in Cypress, TX are very diligent and responsible in their work, even if they do damage a component of the system, they will reimburse you.

You can also ask a professional for exactly how long the system will work without any faults, and if the system malfunctions before this duration is over, the professional will have to fix it for free. An air conditioner is an expensive appliance, and you should not take any risks when it comes to installing or repairing it.
Hence, it is infinitely more favorable for the homeowner to get a professional to solve any issues related to their air conditioning system.

·  Right Level of Refrigerant

This is another key point during air conditioner installation in Cypress, TX. While a professional will know exactly the level of refrigerant needed for a particular unit for it to run efficiently, you may not know this. The wrong level of refrigerant will cause decreased efficiency and greater electricity bills. Hiring professional help will save you this money, and will ensure optimum performance of the unit. Hence, the wiser choice would be to have your air conditioner installed by an experienced expert.

·  Properly Sealed Ducts

Contrary to many people’s belief, duct tape is not enough to seal your ducts. Especially those of the air conditioner. It is fairly common for people to use duct tape for this purpose, although a professional that deals in air conditioner installation in Cypress, TX would not do the same. It is imperative that the ductwork in your house is well maintained.

If the ducts are leaking, cooling is being lost through the fissures. This means that there is extra pressure on the system to achieve the same cooling. This also means that your electricity bill will be greater. As a result, the system will start to wear early on and the life span of the unit will be shortened.

·  Proper Installation

One of the greatest advantages of having professional help in the process of air conditioner installation in Cypress, TX is that they make certain that all the components of the air conditioner have been properly installed and sealed and that there are no leakages, drainage problems, etc., that could cause you any problems in the future. Not only does this make it easier and more comfortable for you to have the air conditioner installed but also gives you a peace of mind of not having to worry about the AC malfunctioning or breaking down.

Air conditioner installation in Cypress, TX is not as easy as it sounds. You might think you can get it right, but there are always little things that you do not know of, that a professional would. You should not risk your new and expensive cooling appliance by attempting to install it yourself. You should consult a professional for air conditioner installation in Cypress, TX. There are tons of problems that can arise if you do it on your own. The unit might not be fixed properly, or there could be a leak in the ducts through which the cooling could leak, or the unit might run out of refrigerant. These issues cause a surge in your electricity bills. This might cost you much more in the long haul.

If you need to install or repair your air conditioning unit, contact Cypress Heating and Air Conditioning. Not only are they licensed and authorized, but their skilled professionals also have years of experience. They can install or repair your heating or cooling appliance efficiently and quickly.

Air Conditioner Repair Spring, TX