Wouldn’t you agree that there is nothing much worse than waking up in the middle of the night because you were shivering cold? Now it’s one thing to have to reach out for your covers and pulling them over your body, but what if your furnace has completely stopped working or is working very poorly.
Some people have a little DIY experience to repair their furnaces, but heating and air conditioning services in Katy, TX advise that you leave this job to the professionals. This is because replacing your heating systems can be quite expensive. The furnace may even get further damaged when you fiddle around with it. Your best bet, however, is to follow our checklist of things that should be avoided.
With further ado, here are the most common blunders that have been identified by heating and air conditioning services in Katy, TX.
1. Problems with the Thermostat
This may sound silly, but people do think their furnace is malfunctioning but have their thermostats set at room temperature. Wouldn’t that be an embarrassing reason to call in heating and air conditioning services in Katy, TX? You’ll be surprised at how many times this has happened.
Some thermostat checks you can conduct on your own include firstly checking the battery of the device. If your thermostat needs a battery change, it may be the reason why your furnace is malfunctioning. Other than this, you can even open the thermostat to check whether any dust or debris has clogged in there. If this is the case, all you need to do is gently blow at these blockages.
Another problem that homeowners face is seen in the case of programmable thermostats. They program these devices to turn on right before they get home, but find that their home is still cold. This is probably because the date and time settings in the device need adjustment. If you can’t figure out how to do this, then you can go ahead and heed the advice of heating and air conditioning services in Katy, TX.
2. The Furnace Is Not Producing Heat
Heating and air conditioning services in Katy, TX have found that there could be a number of minor reasons why this may occur. The very first thing you will need to confirm is the thermostat is set to ‘heat’. If it is already at this setting, then you should adjust the temperature a few notches to check if any noticeable changes occur. If you don’t notice any difference, then there is a good chance that your furnace’s fuse or circuit breaker has tripped or has blown.
There is an easy way of checking whether the home breaker is working. All you will have to do is flip the throttle from on to off, and then on again. This will have reset the breaker and this is when you should test your furnace again. If it continues to perform ineffectively, then there is definitely a problem with the wiring of the circuit breaker. There is nothing further you can do here, and you should call in heating and air conditioning services in Katy, TX for a quick fix.
3. The Furnace Is Not Producing Enough Heat
A furnace that is struggling to produce heat is a completely different matter as opposed to the one we just discussed. Heating and air conditioning services in Katy, TX will advise homeowners to check the air filters in these cases. It is quite easy to visually check whether the air filter of your furnace is clean or not. You may even find that the air filter is clogged.
Clogged air filters are one of the main reasons why a furnace stops working effectively. All you have to do is locate the air filter first. These are most likely grates in the ceiling, wall or even the floor in some cases. You may even have a furnace system which has the air filter within it.
Once you’ve found it, you can check whether the filter is clean by shining light through it. If light does not pass through it, this means that it needs changing. Other than this, when you smell something dirty or dusty whenever the furnace is switched on, it is another sign that the filter needs to be changed.
If you’re having trouble locating or replacing your furnace’s air filter, then you should go ahead and call heating and air conditioning services in Katy, TX.
4. The Burner Flame
The most common failure associated to the burner of your furnace is when they have come up with a contamination. Heating and air conditioning services in Katy, TX have found that there is one very effective way of checking whether your burner flame system is contaminated.
If your furnace’s burner system is even and blue, then this means that it is most likely clean. However, if it is yellow, then you probably have a dirty burner. Now there are some DIY methods of cleaning your burners but heating and air conditioning services in Katy, TX, advise not to try this on your own. All you can do is make sure that dust does not accumulate in the system during the summers and have it checked some time before winter hits. It is also advised that the burner assembly should be cleaned on an annual basis or even replaced if the one in use currently is in poor condition.
These are some of the common problems that cause furnace malfunctions. While knowing about them can be helpful, you should also make sure that you have your system inspected on a regular basis – whether bi-annually or annually.
Cypress Heating and Air Conditioning
These were some of the problems that you could avoid while using your air conditioner. However, there are some problems that are far too advanced. If what you’re facing is causing you discomfort at home, then you should definitely call our professionals in for an inspection. Visit our website to have a look at our services or call at 972-278-3506.