Author: Jamie Ndungu

Your home is a haven that should keep you safe and comfortable from the world’s troubles. Therefore, this means aspects such as the temperature of your Katy, TX home should be conducive enough for you to enjoy family time indoors, no matter the season. Unfortunately, this may only sometimes be the case. Even with a proper heating and air conditioning system installed by an air conditioning service provider, there are times when your home will suffer a temperature imbalance. The temperature imbalance in your home might disturb you, especially during the hottest summer months or the coldest winter nights. Temperature imbalance in your home is primarily infuriating since you are still paying for the energy bills. Although these issues are annoying, taking them on a positive stride is advisable. They can show more significant underlying problems with your system. Some of the considerable causes of temperature imbalances in your home include;

Rising Heat in Multi-level Homes

Is your Katy, TX home a multi-storied? The problem might lie in the natural temperature difference between levels. For instance, in most two-storied houses, the temperature difference between the ground and first floors is 8-10 degrees. This means you will always feel a temperature difference between these floors in all seasons because hot air naturally rises. Thus, it moves from the lower floors of your house to the higher rooms.

Consequently, the cold denser air settles on the lower. To top it off, most HVAC systems only check the temperature around the thermostat. Therefore, if your home’s thermostat is located on the lower floor, the system will adjust the temperature according to the reading in the lower room. Consequently, the rooms farther away or above the ground level are left under-conditioned. Therefore, when you notice a temperature difference between the higher rooms and those on the ground floor, contact an air conditioning service provider.

Leaking Air Ducts

A ductwork in the HVAC system transports conditioned or heated air from the system to the rooms in your house. In addition, the ductwork transports the collected air from your rooms to the air conditioning system. Therefore, if your home’s ductwork leaks, the conditioned air gets lost on the way to the required room. Ductwork leakage can lose up to 30% of your airflow. Notably, as long as your ductwork leaks, your house’s airflow and air quality are compromised.

On the one hand, small leaks can affect the air quality and flow throughout the home, and on the other extensive and considerable leaks can completely cut off airflow to distant rooms. Therefore, if you notice that a distant room is not getting any airflow or has a temperature difference from those closest to the system, you should contact an air conditioning service provider to check your ductwork.

Improperly Sized HVAC System or Ductwork

The efficient operation of your HVAC system is highly dependent on matching it correctly with your home’s temperature requirements. If your HVAC is a smaller size, then it will not be capable of meeting your temperature requirements which strains the system. In addition, this means there will always be a temperature difference in your home as the HVAC unit tries to prioritize.

On the other hand, if the HVAC system is bigger than the one needed for your home, it will oversupply your home with airflow, which saturates it and affects the cycle of the system. Therefore, getting an HVAC system the right size for your home is vital. Hence, you should consult a professional air conditioning service provider before purchasing an HVAC system.

Similarly, the wrong-sized ductwork for your home will impact the temperature balance of your home. Undersized ductwork will not effectively deliver the airflow needed to balance the temperature, while oversized ductwork will over-saturate your airflow. In addition, the wrong-sized ductwork of the HVAC system can cause long-term damage to your system. During warm months improper airflow can cause the system to overheat and fail, while in cold months, it can cause the evaporator coils to freeze. Therefore, it is not only essential to get the right-sized HVAC system for your home. It is also imperative that a qualified air conditioning service provider install the system.

Poor Insulation

Poor insulation is the other major cause of temperature imbalance in most Katy, TX homes. Although this factor is dominant in older homes, it also happens in modern houses with thin walls and poor insulation. When your house lacks the proper insulation, your home cannot retain the heated or cooled air by the HVAC system in specific rooms. The air escapes to the outside, and the unconditioned air from the outdoors finds its way into your home. Consequently, there is an imbalance between the rooms that retain the conditioned air and those that do not. Therefore, it is advisable to have a professional air conditioning service provider check your home’s insulation once you notice a temperature imbalance.

In addition, you waste a lot of energy, and your energy bills are higher as your HVAC system battles and runs overtime to keep your house conditioned, thus using more power. This additionally strains the system, and the continuous running reduces the efficiency of your system. Finally, the system can result in breakdowns and unnecessary visits from the air conditioning service provider due to the stain.

Factors Relating to the Room

In some cases, the temperature imbalance in your home does not need an air conditioning service provider because it is caused by simple room factors such as the opening of windows and the size of the room. Therefore, before calling an air conditioning service provider, ensure your windows are locked, and the remaining ones are resolvable.

Many factors can cause a temperature imbalance in your home. Luckily most of them are resolvable to return your home to its peaceful state. Therefore, contact us at Mr. Reliable Heating & Air for any temperature imbalance issues in your home. You will experience the difference after the service delivery.

Check our most recent blog on this topic here.

Photo By Maridav at Shutterstock

When installing an HVAC system for your home for the first time or replacing an existing one, some factors are critical to consider. For example, the type and capability of the HVAC play an important role in how long the system will last and the service it offers you. The other important attribute you should check is space, although it seems insignificant, is the space requirement. For the older HVAC systems, the air conditioner installation technicians need much more space for installation because the older units have multiple units. In addition, those HVAC systems were less effective than those available in the market. However, if space is limited in your The Woodlands, TX home, you could benefit greatly by installing a packaged HVAC system. Below are some of the benefits of installing one at your home:

Installing a Package HVAC System Is Easy

An HVAC package unit’s assembly is done in a controlled indoor environment. Thus, the unit is destined to start working upon the installation. There are no outdoor units or indoor systems, just one compact system. The air conditioner installation technician will also charge you less for the job. This is because only a single unit will take the technician less time to install compared to the traditional multi-unit heating and air conditioning system. The only drawback you might face with these systems is corrosion, especially for those that live along the Texas Gulf Coast. However, you can address this problem caused by the salty water by having an annual paint job.

Easy and Streamlined Maintenance

Regarding heavy-duty or routine maintenance, most air conditioner installation companies charge an initial and hourly fee. With a package HVAC unit, all the parts are within a single and easy-to-reach location, meaning these costs are offset. This ensures that the installation technicians don’t have to go back and forth from exterior to interior units. They also don’t have to crawl into the cramped spaces to make repairs or replacements. Additionally, the AC repair technicians will have an easier time when they come for the annual maintenance of your heating and air conditioning system. Thus, repairing and servicing a package HVAC unit is cheaper compared to others, say a central heating and air conditioning system.

Saving Interior Space

Do you live in a compact house? Is your living space cramped? Then you want to avoid conceding any square footage by installing a huge air conditioning system in your basement. Rather, you can use the space for adding value or even entertainment at your The Woodlands, TX home. You could add a finish to your basement to make it more comfortable and appealing. Buying an HVAC package unit should be an issue of the past. The air conditioner installation professional can install it next to your house or on your flat roof. This way, you will have more space in your compact home where your kids can play, or you can build what you want.

Lower Utility Bills

Since a package HVAC unit is an All-in-one heating and air conditioning solution, they do not have to put in as much effort as multi-unit systems. This results in lower monthly energy utility bills and higher energy efficiency. Most package HVAC units are ENERGY STAR certified, meaning they have met the requisite EPA recommendations on environmental friendliness and energy efficiency. However, check for the energy star logo before purchasing one.

However, even the most energy-efficient unit can cost you a fortune if you don’t maintain it. For instance, failing to clean the evaporator coils will reduce heat transfer. This means the unit will not be able to cool your home efficiently. As a result, it will work harder to compensate for the ineffectiveness, using more energy. Hence, you will have a higher bill at the end of the month. Are you struggling with a high-energy utility bill? Have an air conditioner installation technician install your home’s energy-efficient package HVAC system.

Reliability and Versatility

Do you want a versatile and reliable heating and cooling system? Then you found your answer in the packaged heating and air conditioning system. One thing the older multi-unit HVAC systems have in common with the packaged heating and cooling systems is their various options. The options of a packaged unit are in a single unit. However, homeowners can choose cooling, heating, and air conditioning energy sources like gas, heat pumps, or even electricity-powered units.

Remember to choose wisely, as this choice potentially impacts your monthly utility bills. Before choosing a gas- or electricity-powered unit, consult your air conditioner installation technician to help you determine the capacity that works best with your unit. They will conduct load tests and consider the number of people living in your home, among other factors, to develop a perfectly-suited packaged unit for your home.

Can Cool or Heat a Large Space

Is your The Woodlands, TX home extensive, and are you wondering whether a packaged heating and air conditioning system will do the job? Worry no more. Whether you are installing a home or business air conditioner installation, a package HVAC unit will heat them all, regardless of the space size. While at it, they will do so at only a fraction of what the traditional units would cost you. However, you should ensure that you get the right unit. Hence, consult your air conditioner installation professional for advice.

Most of the packaged units are between 3-20 tons. Thus, they can cool over 12000 Btu/h. A three-ton packaged HVAC system can cool most homes. However, if you want to cool or heat a larger showroom or warehouse, enlisting a heating and air conditioner installation technician gives you the added versatility of the single unit in cooling or efficiently heating the space.

Have these benefits wowed you? You can enjoy them at your home or premise. Contact us at Mr. Reliable Heating & Air to book a package HVAC installation appointment.

See our most recent blog on this topic here.

Photo By Monkey Business Images at Shutterstock

Do you have an HVAC system installed at your home? Then you must understand how various components of your unit work. Knowing how they operate, you can detect any signs of failure and take the required steps, like calling a heating and air conditioning repair technician for further inspection. Additionally, knowing how the appliance works is critical to its maintenance. Thus, you’ll get to save money and prevent inconvenient downtimes, especially for those who have installed HVAC systems in their offices. However, some heating and air conditioning system components protect it from unforeseen failure. These components act whenever they detect something amiss in your HVAC system, preventing fires, compressor failure, or even high energy use. This article addresses these components and measures you should take to ensure they remain operational.

Contactors

A contactor is among the lesser-known components of your HVAC system, albeit critical. It controls where and how electricity is delivered to some parts of the HVAC system to cool or heat your home. Hence, it is directly responsible for the efficient functioning of your HVAC system. Its failure could mean that the unit will likely not start. You should have a routine inspection by the heating and air conditioning repair technicians when they come for a maintenance visit.

When it is time to start a cooling or heating cycle, the contactor receives the signals regarding the voltage from your thermostat. When the contactor receives the signal, it is lowered. This allows the electricity to start flowing through. When the thermostat finishes the cooling cycle, the contactor raises and stops the electrical flow into the HVAC system. Unfortunately, there are some times when the contactor might need to be more efficiently functioning.

This mostly happens due to compressor damages that aren’t addressed quickly. Since replacing the contactor is a high-voltage hazard, you should leave the job to a heating and air conditioning repair technician. A properly working contactor protects your system from overcharges. Hence, be proactive and regularly maintain your HVAC system, including the contactors.

Air Filters

When did you last change the air filters in your HVAC system? Can you even recall? Though at times the most overlooked component of the heating and cooling system, the filter is one of the most critical parts of an air conditioning unit. They are not just cardboard boxes filled with pleated or fiber material. They are also protective of your HVAC system. But how do they achieve this?

Well, the primary function of your air filters is filtering air circulating through the heating and air conditioning system. All the air that cools or heats your home must pass through an HVAC air filter. Hence, keeping the filters clean will ensure the HVAC system runs smoothly and efficiently. It also ensures that you have enhanced indoor air quality and that everybody at your home breathes fresh air. Additionally, heating and air conditioning repair technicians recommend replacing the air filters for at least 1-3 months or less for homeowners with pets and toddlers.

If the air filters are dirty, they reduce comfort and airflow at your home. As a result, the fan uses more electrical power to move the air. You will have to pay more in electrical bills, which you could have avoided by ensuring that your filters are clean. Unfortunately, the additional strain on your HVAC system could expose various components to premature wear and tear. Hence, you could call a heating and air conditioning repair technician to replace a component or repair the unit frequently. The filters protect your system from issues like straining, short cycling, and dirty evaporator coils by filtering the air.

Fuses

The other protective component of your air conditioner is the fuse. It blows whenever there is a malfunction, cutting down the power supply into your HVAC system. Therefore, you should keep replacing the fuse now and then. You will find a fuse in the evaporator coils, compressor, wiring connections, and motors. Fuses protect the components above from overloading and overheating. With each component serving to complement the functionalities of the other, failure in one could mean that your entire HVAC system will be dysfunctional. Are fuses blowing frequently? You should call a heating and air conditioning repair company to have your unit inspected for various issues. It is the fuse that protects these components from breakdown. Keeping a supply of replacement fuses may help, but you should have routine maintenance from your reliable heating and air conditioning repair technician. The professionals will be able to inspect your unit to determine what is causing the fuse blow-out and resolve the issue.

Thermostat

Owing to how much homeowners use their HVAC systems, they should only stop at something to ensure they save money and energy. For this reason, you must understand how intertwined your HVAC system and thermostat are. It can help you choose a quality thermostat. The thermostat is triggered whenever the temperatures become too hot or cold, circulating cold or warm air throughout your home. You can liaise with a heating and air conditioning repair company to install a smart or programmable thermostat for more effective temperature and humidity control.

These thermostats can be programmed or adapted to your routine for more personalized heating or cooling. In doing so, they help reduce heating and cooling energy expenses. Lack of preventative maintenance upkeep could cause the thermostat not to cool or heat your home correctly whenever needed. This will cause your home to become uncomfortable. Failure to have a heating and air conditioning repair technician service your HVAC system and thermostat means you’ll spend a fortune on heating and cooling energy.

We Can Help You Protect Your AC Unit

Many other components protect your HVAC system, from flame arrestors and sensors to high-limit switches. These components need to be maintained. Contact us at Mr. Reliable Heating & Air for an HVAC maintenance service.

Check our previous post on this topic here.

Photo By Joe_Potato at istock

SMART HVAC systems use wireless technology to communicate with the other devices in your home. Smart air conditioners can be connected to other smart home devices to ensure convenience at your Cypress, TX, home. The connection improves the heating and air conditioning system’s capabilities, resulting in efficient cooling and heating. But what makes your HVAC system smart? Are there improvements that you can make to your existing system to make it smart? Many components make your HVAC system smart, and yes, your heating and AC repair technician can add some components to enhance your HVAC system. Below are some of those things that can make your standard heating and air conditioning system smart;

Remote Control Device

One of the main benefits of a smart HVAC system is its convenience; nothing does this better than a remote-control device. Remote control devices enable you to regulate the cooling and heating of your home from anywhere, provided there is an internet connection. You can signal your HVAC system to start cooling at work to come home to a perfectly cooled home. Remote control devices can include computers, tablets, and mobile phones. Most smart thermostats have mobile applications you can install and use to control your HVAC remotely. Hence, talk with your heating and AC repair technician to conveniently upgrade your HVAC.

Smart Thermostat

Unlike conventional thermostats, smart thermostats can be connected to the internet for remote control. Smart thermostats have different features, including:

Climate Zoning

There are smart thermostats that have zoning system capabilities. Hence, if your heating and air conditioning system struggles to heat or cool your indoor space, you should talk to your heating and AC repair technician about installing such a smart thermostat. They can help you individually control the heating and cooling in different rooms, ending those thermostat wars. Hence, your bedroom can be heated while the HVAC system is cooling your sitting room.

The Communication Protocols

For successful cooling or heating, your HVAC system should be able to communicate with other smart devices, such as the thermostat. Smart thermostats use different communication protocols such as WIFI, Bluetooth, Zigbee, and Z-Wave. You can control the smart thermostat with your smart home in-application if you have an integrated system. If you use a thermostat that doesn’t use the internet, have a heating and air conditioning repair technician install the right hub.

Remote Sensors, Geofencing, and Energy Reports

These are the other features that you will likely find in smart thermostats. With geofencing, the smart thermostat can sense when you are near your Cypress, TX, home and send a signal to the HVAC to start heating or cooling your indoor space to your preference. If you don’t prefer tethering your thermostat to the smartphone, you can invest in one with motion sensors. Thermostats with proximity sensors can turn your HVAC system off or on whenever needed. There are smart thermostats that can deliver energy reports.

Voice Control

When shopping for a smart thermostat, ensure that you look for one that you can integrate into your smart home hub. Whether you prefer Alexa, Vera, or Siri, your favorite digital assistant will be able to control your indoor temperatures using voice commands.

Internet Connection

You need an internet connection to control your smart heating and air conditioning system. This connection can be wireless or wired based on your thermostat. Hence, before you have a heating and AC repair technician install a smart thermostat, ensure you have a reliable internet connection. Remember, your remote-control device, like the smartphone, will need an internet connection.

Smart Vents

Heating and air conditioning vents facilitate a controlled airflow into your home. Closing the air vents partially reduces the air supply. This can help you remotely regulate indoor temperatures and also maximize efficiency. Smart air vents allow a remote airflow control. You can integrate the other smart home devices with smart vents. Although your smart HVAC system can work with normal vents, having a heating and AC repair technician install a smart one can help.

Air Purifiers and Smart Humidifiers

Most heating and air conditioning systems control humidity and temperatures. However, the humidity control is moderate because it isn’t at the core of the services of an HVAC system. Hence, you might want a heating and AC repair technician to install a smart humidifier to control humidity. Although your HVAC system has filters for trapping the contaminants and pollutants, installing an air purifier would be a welcome addition. Smart air purifiers can help you track the pollutant levels at your home, monitor the indoor air pollutants, and alert you whenever the indoor air quality falls below safe levels. They also can notify you when it is time to change the air filters. Since smart humidifiers and purifiers differ in integration capabilities and features, you should consult your heating and AC repair technician before purchasing them.

Sensors

To further enhance your HVAC capabilities, the heating and AC repair technician can install sensors in your unit. The common HVAC sensors include:

Environmental Sensors

These sensors monitor the condition of your heating and air conditioning system. they will alert you if something with your HVAC system is amiss. They might alert you to leaking ducts, dirty filters, and reduced HVAC efficiency. You can use them as reminders for maintenance and cleaning.

Occupancy Sensors

These sensors detect when there are people in your Cypress, TX, home and adjust the HVAC controls automatically. For instance, they can send a cooling signal when you enter your home and raise the temperatures w bit when you leave. Having a heating and AC repair technician install them means you can save some bucks on heating and cooling.

The technician also can install proximity sensors that instruct the HVAC to start cooling or heating when you are near your home.

Do you want to make your standard HVAC system smart? Contact us at Mr. Reliable Heating & Air to book an appointment.

See our previous blog post on this topic here!

Photo By Pixelwind at Shutterstock

Although an HVAC system is a critical appliance for your home, it is worth noting that it isn’t a standalone component. It comprises many parts that work together to ensure that your home is cooled or heated sufficiently. One of these components is the HVAC plenum box. This is a piece of air duct that connects to the unit’s air handler. It is responsible for moving the air through your HVAC system and your Katy, TX home. However, you could also have an HVAC system with two plenum boxes, one installed on the return side and the other on the supply side of your duct system. But what exactly is an HVAC plenum? That is the question that this article will seek to explain. You also will learn of the common plenum issues and how the AC repair technician will address them.

What’s an Air Conditioning Plenum?

As explained in the introduction, the plenum is a box made from a metal sheet and connects to the air handler of your air conditioning system. The HVAC system creates warm or cool air based on the season. This air goes to the air conditioner or the furnace’s air handling unit. The plenum in the air handler’s supply side takes the newly cooled or warmed air and directs it into the air ducts. This explains how the air from the HVAC system gets distributed across your home. The plenum on the return side of the HVAC system’s air handler takes the air inside your home and later sends it to the furnace or air conditioner for heating or cooling.

What Is the Difference Between a Plenum and an Air Duct?

Can plenums be considered to be a part of the air duct system? Yes, they are. They are the piece connecting the air ducts to the central heating and air conditioning system. They are typically box-shaped and made from a metallic sheet. However, since the residential air ducts are rectangular and made from a metallic sheet, distinguishing the two can prove challenging. For this reason, any AC repair involving either should be done by a professional.

Some homes feature cylindrical ductwork made from aluminum, galvanized steel, or even wire coils covered under durable plastic. No matter what type of air ducts you have installed at your home, the plenum is always a metallic sheet box. The ductwork is a vehicle that distributes the air from the heating and air conditioning system to all rooms of your home. The plenum is the piece or part that joins the HVAC and the air ducts. It allows air circulation between your ducts and your air handler. Hence, you should have an AC repair technician inspect and fix any issues with the plenum when they come to ensure your home is adequately cooled or heated.

Do You Require a Plenum?

An HVAC plenum is essential, especially for those with a central cooling and heating system. So, do you need a plenum? Yes, you do. Two are needed for your HVAC system to work efficiently and circulate air at your home. Do you need a plenum installed for your HVAC system? Ensure that it is installed by an AC repair professional in Katy, TX. They know the ideal place to install it.

What Are the Common HVAC Plenum Problems?

Leaky Plenum

At times, air could leak from the HVAC plenum. This will result in your air conditioning equipment running long to cool the indoor air. This is because sufficient cooled or heated air doesn’t make it into your home. If the HVAC system cannot reach the temperatures set in the thermostat, have an AC repair technician inspect it for a plenum leak. Although you could repair the unit yourself, that is not recommended. This is because you might worsen the problem or even be injured. Instead, have a professional inspect the component for leaks and seal them to ensure sufficient air flows into your home.

Dirty Plenum

The plenums could experience a buildup of dirt and dust over time. Unfortunately, this might make them run inefficiently, reducing the airflow into your home. To ensure that the plenums remain clean, it is recommended that you always change the air filters after every 3 months. Additionally, you should have a duct cleaning service done by an AC repair technician. Although DIY duct cleaning is useful and important, you might need help to reach the plenums. Thus, you should have a professional clean the air ducts regularly.

Wrong-Sized Plenum

An improperly sized plenum will adversely affect the entire heating and air conditioning system. If it is too small, it will reduce airflow. If the plenum is too large, it might make your HVAC system work harder than necessary, increasing your electricity utility bills. Do you suspect the plenums installed at your Katy, TX home aren’t of the right size? Have a licensed AC repair technician inspect it. The professional will be able to test the plenum and also suggest the right replacement. Since the plenums are a vital part of your home’s HVAC system, you should not try to repair them yourself. Always have a licensed technician repair it.

Incorrectly Installed Plenum

Were the plenums properly installed? If they weren’t, you could be experiencing various air circulation problems and a regularly malfunctioning heating and air conditioning system. If you hire an inexperienced AC repair technician, they may connect the plenum incorrectly, make attachments at the wrong angles, or duct the air duct holes poorly. All these can affect the airflow. Do you think that your HVAC plenums have either of these issues? Then enlist an AC repair professional for further inspection. After the checkup, the technician can identify and resolve the underlying problems.

Call Us for a Reliable Service

Have you noticed that your HVAC plenum is experiencing either of these issues? Does your HVAC system insufficiently heat or cool your indoor space? Contact us at Mr. Reliable Heating & Air.

See our previous blog post here!

Photo By photovs at istock

Do you have an HVAC system at your home? Then you have heard of an HVAC hard-start kit and wondered, do I need one? Unless the HVAC system is too old and having problems starting, you don’t. If you have enough money to buy a new system and pay an AC repair company for installation, then you DON’T need one. But what’s a hard start kit? How does this device help your Katy, TX home air conditioner? This article will teach you about this device and when and how to use it.

What’s an HVAC Hard Start Kit?

It is like a start capacitor. A hard start kit is an electronic/electrical device for resolving HVAC hard starting problems. However, you must first understand the working of an AC compressor when the unit learns how the hard start kit works. Essentially, a compressor is your heating and air conditioning system’s heart. It is what powers the air conditioner. The compressor is the hardest working part of an HVAC system. You will hear a whirring sound when the compressor starts the cooling cycle. Hence, any problem with the compressor will make the AC inoperable and should be attended to by an AC repair company.

As the compressor raises the temperature and the pressure of the refrigerant, there is a metering device that reduces the pressure and temperature of the same. The hard start kit does two critical things for your HVAC compressor. It reduces the compressor’s start-up period, and the power used to jump-start it. It will take the compressor over 4 times more power to start and run without the start capacitor. This power surge will increase the electrical current during start-up, resulting in excessive heat that could damage the compressor and other components of the HVAC system. Such problems will require to be handled by an experienced AC repair company.

Without the start capacitor, the HVAC compressor has a torque efficiency of about 50%. However, this increases to about 98% with an HVAC hard start kit. This means that the HVAC system takes considerably less time to shift to run mode from start mode with high torque efficiency. This transition is also smoother. As a result, your HVAC system lasts longer. So, doesn’t it then make sense that you should have an AC repair company near you install a start capacitor to your HVAC system? Yes! HVAC manufacturers used to produce AC units that had inbuilt start capacitors.

What Are the Causes of Hard Starting?

Unfortunately, there are many reasons for the HVAC system to experience this particular issue. Fortunately, knowing them will help you find a solution and also know then to have an AC repair company inspect your system. One of the reasons for hard starting is when the capacitors lose their ability to store enough charge for the start motors. Without sufficient charge, the capacitor cannot send enough power to the AC motors that start and keep the compressor running. Most capacitor issues are caused by heat.

The other cause of hard starting is damaged compressor motors because of lack or loss of lubrication. If the compressor doesn’t have enough lubrication, it tightens up, and its movement is inhibited. Hard starting is also a sign that your air conditioning unit is damaged and up for replacement. Your AC repair company can confirm this when they send someone for a maintenance visit. However, it is worth noting that replacing the hard-starting HVAC unit is sometimes economically better than repeated repairs.

Signs of Hard Starting

What are the warning signs of hard starting AC? One sign is short cycling. Short-cycling compressors start-up, run for a short while, and then stop. This means the compressor doesn’t have sufficient stored energy for powering the HVAC and cooling or heating your home. The other sign that the HVAC system has a hard-starting problem is when you hear a clicking or loud noise from your air conditioning system. The clicking sound indicates that the capacitor has failed and requires a replacement by an AC repair company in Katy, TX. Remember, too much strain on your HVAC and short cycling will increase energy consumption.

Who Requires an Air Conditioning Hard Start Kit?

Your air conditioner requires TLC, just like any other appliance at your home. Even before the compressor begins showing any damage, you should have an AC repair company service it. When is a hard start kit required? If you want your AC to serve you longer or have noticed that the circuit breaker trips whenever you turn on the system, consider purchasing the kit. You also need a hard start kit when the compressor has started to show signs of hard starting or when you have no money for HVAC repairs or replacements.

Different Types of HVAC Hard Start Kits

Positive Temperature Coefficient (PTC) Hard Start Kit

PTC is a 2-wire kit that uses ceramic parts to remove the circuit’s capacitor. Because the PTC component can heat up within a second, there is no need for a capacitor. Because of its 2-wire feature, a PTC hard start kit is considered more convenient and easier to install.

MPR Kit

The potential mechanical relay (MPR) hard start kits take capacitors out from a circuit after the compressor reaches 80% capacity. They rely on electromotive force. Compared to PTC, these kits are more reliable and are recommended by many professionals. You should call your reliable AC repair company in Katy, TX for guidance on choosing the right kit for your air conditioning system.

If you are experiencing this problem, contact us at Mr. Reliable Heating & Air. Our technicians can repair your HVAC system to ensure you do not need to purchase a hard start kit. However, if your system is too old and experiencing this problem and you don’t have money to replace it, our technicians can help you choose the right kit.

See our previous blog post here!

Photo By Ozgur Coskun at Shutterstock

When a malfunctioning heating and air conditioning system occurs at the worst time possible, it can cause major disruption to your home’s comfort. Choosing the right technician for repair work makes such an immense inconvenience even more difficult. After all, if you don’t make the best decision when selecting a contractor, you may end up with bigger problems than what you began with. This article will examine cases where a heating and AC repair service in Spring, TX can turn out monstrously wrong rather than beneficial.

Improper Disposing of Old Parts or Materials

An issue that may arise when hiring a heating and AC repair service is improperly disposing of old parts. This can be very hazardous to your home, as the wrong disposal methods could cause environmental problems in your living space. If a technician doesn’t follow regulations for getting rid of old parts, it could seep into your home’s environment and compromise the health of everyone living there. If the parts or materials damage the environment, your neighbor’s property, or even your own, you could be in a disastrous situation. You may face legal action, expensive repairs, and a reputation stained by an environmental mishap. Therefore, when looking for a heating and AC repair service in Spring, TX ask about their disposal policy and ensure that they follow all the necessary regulations.

Failing to Identify the Problem in a Timely Fashion

Another potential issue is when a technician fails to identify the root cause of the problem in an appropriate amount of time. If a technician cannot identify the source of your heating and AC system’s trouble in a timely fashion, you may find yourself wasting both time and money. This is because you will relax knowing that an issue has been fixed, only to be caught off guard when your entire system stops working shortly after. This can cause a huge disruption to your home and leave you feeling frustrated, angry, and out of pocket.

For example, if you called for heating and AC repair service because your system wasn’t heating your home properly, and the technician only fixes the problem superficially without properly diagnosing what is wrong, you could find yourself in a costly situation further down the line. Faulty wiring could be the root cause of the problem, but the technician only replaces your air filter, for example. While you are enjoying that your unit is performing well immediately after the heating and AC repair service, the faulty wiring that was left unchecked may cause a major issue in the future, such as a fire outbreak.

To avoid such a disaster, you should always inquire about the heating and AC repair service technician’s experience and qualifications. Ensure that the technician is certified, has extensive knowledge about your specific system and its components, and employs a thorough diagnostic process when troubleshooting. Doing so will help ensure they can promptly identify and resolve the root problem.

Inadequate or Incomplete Repairs

Sometimes, even with the right diagnosis, the solutions a heating and AC repair service technician provides may not be adequate. This can happen due to inexperience, lack of knowledge or the technician simply taking shortcuts while fixing your system. Inadequate repairs can leave your heating and AC system worse than when you first called for service.

Additionally, it may not have been repaired correctly, leaving you open to future problems. For example, if a technician doesn’t have the exact replacement part for your system, they may opt to install a cheaper and incompatible part that won’t get the job done properly. While this will provide temporary comfort, the part may fail, leading to more downtime and extra costs.

When searching for a heating and AC repair service in Spring, TX, do your due diligence and research the company’s reputation. Ask previous customers about their experience and check reviews online to ensure they provide quality services. Additionally, ask if the technicians carry the right parts for your system and whether or not they offer warranties on their work. Taking all of these precautions will help you avoid a situation where you are stuck with a faulty repair job that leaves your heating and AC system worse than before.

Finally, ensure you have the technician’s contact information if something goes wrong. If you call for a follow-up visit because there is still an issue with your heating and AC system, you can be sure they will come back to correct the matter. This way, you can rest assured that your home will be comfortable and safe all year round.

Your Unit’s Warranty Is Negated

Does a warranty cover your heating and AC unit? If so, it is important to ensure that the technician you hire adheres strictly to the guidelines set forth by the manufacturer. If they don’t, any repairs done may void your system’s warranty and leave you open to more expenses should a replacement part be necessary. You can avoid such a financial burden by only allowing certified heating and AC repair service technicians to perform repairs and maintenance on your unit. They will have the necessary expertise and experience to complete the job according to the manufacturer’s instructions, thus preserving your heating and AC system’s warranty.

Looking for the AC Repair Services in Town? Call Us!

If you have an issue with your AC units and need quality, reliable repair services, Mr. Reliable Heating & Air is your go-to team. We provide comprehensive solutions to all your heating and AC needs, from preventative maintenance to emergency repairs. Our certified technicians are well-equipped with the latest diagnostic tools, so you can be sure that any issue will be identified quickly and resolved efficiently. Additionally, we only use genuine parts from certified suppliers, so you can trust that any repairs or replacements done will last for years. Call us today, and let us take care of all your heating and AC repair needs!

See our previous blog post here!

Photo By Olga U at istock

Monitoring indoor air quality is a great way to protect your respiratory health. It ensures you know when to replace the air filters or have an AC repair company in Spring, TX clean the air ducts. Installing a whole-home air filtering system can help ensure that your home has a good IAQ. Did you know that indoor air contains more contaminants than outdoor air? This is true and is caused by the density of pollutants per unit area. Therefore, you must take all the necessary measures to ensure that your indoor air is of great quality. But how do you know that your indoor air quality has deteriorated?

Signs Your IAQ Requires an Enhancement

Increased Respiratory Issues

The EPA refers to poor indoor air quality as indoor air pollution. Several irritants, including toxic VOCs, mold, and cigarette smoke, may contribute to indoor air pollution. However, there still are mild irritants that may result in increased respiratory issues if their concentration increases. Pollen, pests, dust, and pet dander can start accumulating on various surfaces of your home. If these pollutants are disturbed, they will flow into the HVAC system, making you and other family members fall ill whenever they inhale them. Unless you hire an AC repair company to install an air purifier or a whole-home filtration system, these pollutants could worsen asthma symptoms, cause allergic reactions, and new respiratory complications.

Constant Dust Buildup

The other sign you need to improve indoor air quality is when you notice dust accumulating on the upholstery or walls. Are you bothered by the dust on your walls and countertops? It would be best if you started by having an AC repair company in Spring, TX clean the air ducts and replace the filters to see whether there will be a change. If you still notice dust accumulation after this, you should install a whole-home air filter or an air purifier. Dust buildup in your home will give it an unsightly appearance and will mean that you must keep cleaning the countertops and upholstery now and then.

Worsening Skin Issues

Did you know that poor air quality not only affects your respiratory system but also has an impact on your skin? If you did not, now you do. Poor air quality can damage your skin affecting the deep issue and superficial tissue. Eczema, dryness, rapid signs of aging, and increased acne are some dermatological issues tied to poor IAQ. You could also notice increased skin inflammation resulting in blotchy red or puffy spots. If you notice these signs on your skin especially, call an AC repair company and have them evaluate the indoor air quality.

Unpleasant Odors

Many common indoor air pollutants lack a noticeable smell. For instance, a musty odor may be produced by dirt and dust, but it frequently isn’t potent enough to be bothersome. On the other hand, mold is one pollutant of indoor air that has a nasty odor-producing tendency. While some irritants prefer dry environments to grow, others do better in humid ones, with mold favoring the latter. Mold can have an earthy or rotten odor. If you can’t locate the source of any smell, you might have mold starting to grow in places you can’t see. Poor air quality often follows a mold infestation. Air conditioning service from a reputable AC repair company is the best way to ensure that you avert this problem.

Why Should You Install a Whole-Home Air Filtration System?

Boost Your Health

Filtering the pollutants that worsen your health issues is a great way to boost your health. Without those contaminants floating around, the lungs can recalibrate, and the skin will be able to shed those polluted cells. Tackling health hazards head-on is a great way of avoiding long-term or serious illnesses. However, it can prove especially critical for those members of your family with pre-existing conditions such as asthma. It, however, is worth noting that anybody is susceptible to health issues resulting from poor indoor air quality. You can avert all this by having an AC repair company install a whole-home air filtration system.

Creates Better Living Conditions

Your quality of life is critical and starts with that space you spend most of your time, your home. As mentioned above, poor indoor air quality could compromise your health in different ways. Furthermore, it could disrupt your sleep and affect your property. Poor air quality can also result in issues like discoloration of textiles and paints, trim separation, and cracking on the walls and other surfaces. It also can result in mold growth. Ultimately, poor IAQ can create several expensive issues. Having an AC repair company in Spring, TX install a whole-house filtration system is the best way of protecting your quality of life, health, finances, and property.

Have a Whole-House Coverage

Individual air purifiers have their appeal. Most of them are affordable. They are easy to purchase, plug in, and operate. The issue is that the individual units can only do so much when dealing with poor indoor air quality. You won’t have to stress over the safest rooms when you invest in a whole-home air filtering system. You can have an AC repair company send a technician to install a central HVAC unit or a whole home purifier which is relatively easy to use and provides coverage for the entire house!

It Improves Your Air Quality with Speed and Ease

A whole-home air filter works with your heating and air conditioning system to deliver breathable, clean air for your entire home. Monitoring the air filtration system’s functioning and inspecting it for any required maintenance is just as straightforward as using an air conditioning system. Once an AC repair company installs a whole-house air filtering system, you can rest assured that you’ll be inhaling clean air.

Install a Whole-House Air Filtration System for More Comfort

Do you need a new whole home filtration system? Contact us at Mr. Reliable Heating & Air for a quality installation.

See our previous blog post here!

Photo By AntonioGuillem at istock

Anybody interested in a cost-effective home heating solution will likely be drawn to using a dual-fuel or hybrid system. These are the systems that allow one to choose between the installation of a gas furnace or a heat pump. Here, the furnace runs on natural gas or propane while the heat pump is electrically powered. This ensures that your home is properly heated whenever required, leaving it comfortable all year round. Should you consider having a heating and AC repair service provider in Spring, TX install a hybrid or dual HVAC system? Definitely! There are many benefits to this, as you shall learn later. But before then:

What’s a Hybrid/Dual Fuel Home Comfort System?

Hybrid or dual-fuel HVAC systems are heating and cooling systems alternating between a gas furnace and an electrically-powered heat pump to maximize energy efficiency and comfort. Hybrid systems will work all year round, providing cooling and heating services. The heat pump provides effective, efficient cooling across your home in the summer months. The heat pump also will heat your home during fall or spring. Provided temperatures outside your home are over 35 degrees, a heat pump can continue heating your home. Remember, a heat pump is always more energy efficient than a furnace. However, the furnace takes over in dinner to ensure that your indoor space remains comfortable and warm. Hence, you should ensure that a heating and AC repair service provider maintains the hybrid HVAC to ensure that it is functional throughout the year.

How Does a Hybrid HVAC System Work?

The electrical heat pump will provide heat when outdoor temperatures are approximately 40-60 degrees. They operate at optimal efficiency within the above temperature range. When temperatures fall below 40 degrees and a heat pump becomes less efficient, your system will rely on an oil or gas furnace for heating. When the heat pump is within the optimal range of temperatures, it can generate heat with very high efficiency. Hence, if you want an efficient cooling or heating mode, a heating and AC repair service provider should install a dual-fuel HVAC system at your home.

Benefits of Installing a Hybrid HVAC System

Long-Term Cost Savings

Because hybrid HVAC systems are designed to enhance the efficiency of the heating and cooling system, moving to a dual-fuel system may give significant cost savings when managing your energy use. This result considerably comes from heat pump integration into the system. Heat pumps have a considerable advantage over conventional air conditioners as well as furnaces when it comes to energy efficiency. The fact that the dual-fuel system prioritizes energy efficiency makes it a more appealing option in light of growing energy prices. Compared to conventional HVAC systems, dual-fuel systems are far less harmful to the natural environment. Therefore, if you seek a method to lessen your impact on the environment without compromising your comfort level, have a heating and AC repair service provider install a hybrid HVAC system.

Improved Comfort

Besides energy savings, hybrid HVAC systems provide reliable, even comfort across your home. Since the heat pump can easily switch between heating and cooling, you don’t have to balance the AC and heater usage manually; the system does this automatically. This is especially important in the autumn and spring months when you experience considerable temperature fluctuations. By having a heating and AC repair service provider in Spring, TX install a hybrid HVAC system, you’ll get consistent cooling and heating regardless of whatever happens outside. Most homeowners who haven’t used heat pumps before are skeptical that they can provide cost-effective cooling. That is probably because “heat” is in the product’s name.

These Systems are Eco-Friendliness

Dual Fuel systems aren’t just effective and efficient and have a higher affordability month-to-month; they also are highly eco-friendly. As explained above, the electric portion of a hybrid system is used the most compared to the gas furnace. Since electricity is a more sustainable energy source than gas, the system is among the best for eco-friendliness. Hence, this is the best solution if you’re looking for a heating and AC repair service provider to install an environmentally friendly HVAC system.

Increased Energy Efficiency

Hybrid HVAC systems use either gas or electricity, so they combine the best features of these systems. This means that your home will enjoy a considerable increase in the efficiency of your cooling or heating system. For instance, if the electric heat pump begins to underperform, the other component (gas furnace) will kick in automatically and take over. This is the kind of efficiency you would love. Reach out to your heating and AC repair service provider for the installation and maintenance of a hybrid HVAC system, and enjoy such a benefit.

Demerits of a Hybrid Heating System

As the saying goes, not everything which glitters is gold. Hybrid HVAC systems have their advantages, although they also have their drawbacks, as explained below:

High Upfront Cost

Although they save you some money down the line, one of the drawbacks of installing a dual-fuel HVAC is their initial cost. Hence, it is recommended that you have a heating and AC repair service provider come over for a maintenance service to ensure that the system serves your home for a more extended period.

Requires More Space

Hybrid HVAC systems likely will require more space. This poses an issue for homeowners with insufficient room for their systems. Thus, enlist a heating and AC repair service provider in Spring, TX to determine if you have enough space before you purchase this system.

Are you interested in installing a dual-fuel heating system? From the above, you can see that the benefits far outweigh the cons. This is the way to go if you need energy efficiency, improved comfort throughout the year, and an eco-friendly means of cooling or heating your home. Contact us at Mr. Reliable Heating & Air for installing, maintaining, and repairing a hybrid heating system.

See our previous blog post here!

Photo By Ground Picture at Shutterstock

Your HVAC system has several components that must work together to keep your home relaxed. If either of these components malfunctions, you may experience difficulties properly regulating your living space. One of the issues that could result in an HVAC system functioning inefficiently is when the unit has parts that aren’t meant for it or unmatching evaporator and condenser coils. You also could notice a significant increase in your Katy, TX, home’s cooling or heating energy utility bills. This is a sign that your unit has an underlying problem. Do you believe your heating and air conditioning system has an underlying issue? Immediately contact a heating and AC repair technician for a professional inspection and repair.

What Are Condenser and Evaporator Coils?

Evaporator Coils

This air conditioner component is responsible for removing heat from your home. The evaporator coils may be within the air handler or connected to a furnace. It facilitates the process of heat transfer together with condenser coils, creating conditioned air. It contains the coolant in the liquid form delivered to a metering device by the compressor. The refrigerant sucks up the heat from the air passing over the coils from the blower fan.

For the evaporator coils of your HVAC system to remain working efficiently, you must ensure that they are clean. Dirty coils may result in a considerable increase in energy use at your home. Additionally, it might strain your HVAC system, resulting in overheating, frozen coils, and, subsequently, the inefficient performance of your HVAC system. You’ll want to ensure that your heating and AC repair technician cleans the coils and that you regularly change or clean the air filters.

Condenser Coils

Like the evaporator coils, the condenser coils are also critical in the heat transfer process. It is responsible for moving the stale, warm air from the indoor space and exhausting it outside. The component has several tubes that are filled with refrigerant. Within the coils is a chiller that cools the coolant and brings it into the condenser tubing, where it evaporates into a gas.

A buildup of debris on the condenser fins is the leading reason for various problems in the coils. Leaves, twigs, grass clippings, bird nests, and other debris could prevent the condenser from dissipating heat outside. Unfortunately, this also can speed up the deterioration of components of the HVAC system. Heating and AC repair technicians recommend that you ensure the condenser is regularly inspected and maintained.

What Happens if the Evaporator and Condenser Coils Don’t Match?

This Could Void Your Warranty

Most manufacturers of heating and cooling systems have conditions that must be followed for warranties to remain in effect. For instance, they frequently require that property owners have heating and AC repair technicians perform routine equipment maintenance. Carefully read and assess the warranties before investing in a new HVAC system. The size of the condenser and evaporator coils must typically match the manufacturer’s specifications. If they don’t match, you run the risk of invalidating your warranty. Equipment failure and malfunction won’t take long if the coils have different diameters. A reputable heating and AC repair technician can help ensure you have installed the right system for your Katy, TX, home.

The Lifespan and Efficiency of Your HVAC System Will Take a Toll

Commercial and residential HVAC systems require some specific parts to work efficiently. Every component, including the soils, blowers, and wiring, must match suitably for your equipment to run efficiently. Mismatched components will only result in issues in the future, make the system fail shortly, and compromise your comfort. The lifespan and efficiency of your equipment will take a toll if the evaporator and condenser coils aren’t matching. The mismatched coils will make the HVAC system exert more effort to meet your preferred thermostat set temperatures. This is because one coil must work harder to match the other coil’s performance. The additional stress on the unit increases the chances of expensive heating and AC repairs and early equipment failure.

An Increase in Heating or Cooling Energy Bills

Have you noticed that your energy utility bills have suddenly increased after replacing the evaporator or condenser coils? The culprit may be mismatched coils. If the condenser and evaporator coils are of different sizes, the smaller coils will be able to keep up with the larger ones. Unfortunately, this will result in the entire system running longer and using more energy. Hence, enlist licensed, professional heating and AC repair technicians if you need to replace the coils, as they are unlikely to make a mistake.

It Will Compromise Your Indoor Comfort

If the evaporator and condenser coils don’t match, your home won’t cool, and humidity will rise. If the evaporator coil is bigger than the condenser coils, your Katy, TX, home will be cool but humid. If the evaporator coils are too large, your home will not be too humid and hard to cool. Indoor air conditioners have changed a lot recently. Newer models have better air handling and filtering and also lower noise levels. Hence, if you have an older, less efficient unit, you should have a heating and AC repair technician replace it with a newer, more advanced model.

You Might End Up Spending More

The evaporator and condenser coils in your HVAC system were most likely installed together. They should be similar as they most likely came from the same manufacturer. Additionally, they were subjected to wear and tear at the same time. Having a heating and AC repair technician install one means your unit will have a lower efficiency. As a result, you will spend more on cooling and heating costs.

Are you considering a condenser and evaporator coil replacement? You should install matching ones for more efficiency and reduce strain on either. Contact us at Mr. Reliable Heating & Air for a professional replacement. The quality of our AC services is unmatched. Call us now for a free consultation.

See our previous blog post here!

Photo By tomprout at istock

Air Conditioner Repair Spring, TX
Air Conditioner Repair Spring, TX