air conditioner installation

Although your HVAC system works hard to ensure that your business or home is free from any humidity and properly cooled, an entire duct system works hard to distribute the conditioned air. The air ducts are tucked on your ceiling or behind the walls where they are out of reach and keep air properly circulating. How your heating and air conditioning system cycles the air between the cooling unit and your home is through the ductwork. This requires an entry point within each room to allow efficient and quick access to the air conditioner.

While the older air conditioners usually had single or double strategically positioned air vents, the entire cooling design system has seen many changes. These changes are geared towards ensuring efficiency. Nowadays, air conditioner installation technicians recommend that you have multiple air vents or registers in every room at your home or office to optimize the airflow and also reduce the energy expenses of cooling your office or home. So, how can air vents help your air conditioning system run better?

Your Air Conditioning System Needs to Have Return and Supply Air Vents

A heating and air conditioning unit is a closed-air system that cycles the cooled and heated air throughout your Cypress, TX home based on the air conditioning system’s design. The air ducts are like veins that supply air to every part of your home. Therefore, the air conditioner installation professional should properly lay them to supply the air to all parts. They also return any unconditioned air to the system for further cooling.

The vents are the access points to the air ducts that run throughout your home, allowing the conditioned air to move from and to your heating and air conditioning system. The return air vents are responsible for pulling the air from the rooms back into the air conditioning system, while the supply air vents blow the conditioned air from the AC unit to the office or home.

Installing Multiple Vents Ensures You Have Balance of Effort

Your heating and air conditioning system doesn’t get the air from the outside. Rather, it distributes or circulates the air already present within your home. Therefore, to increase the airflow rate and reduce any stress on the system, you should have multiple entry points for the air to flow from and return to the air conditioner. This is the most effective and easy way of cooling your business or home. To ensure that your heating and air conditioning system has an equilibrium of effort, the air conditioner installation technician must design the ducts so that the air the return vents pull is equal to that your AC air supply vents blow from the HVAC system. If your heating and air conditioning system doesn’t have an equilibrium of effort, it will wear out faster because of exposure to unnecessary stress.

The Importance of Return Air Vents

Ensures That Your Home Has Just the Right Air Pressure

If you don’t have enough return air vents at your Cypress, TX home, then the air will not be circulated efficiently. This will result in uneven cooling and heating of your home, making the air conditioning system strain. You might be forced to contact an air conditioner installation technician to replace some prematurely damaged parts. Closing the air vents in unused rooms at your home will increase pressure within the air ducts, placing your entire system under a lot of strain. The strained air ducts can leak or even break the air duct seams on the walls, resulting in leakage of the conditioned air into various parts of your home. If you have noticed this, contact an air conditioner installation professional immediately to have the issue fixed.

Ensures Your Home Is Humidity-Free

Your home’s air is conditioned & filtered through a system of ducts & filters, resulting in a cozy atmosphere inside. Humidity isn’t reduced when closed vents or rooms are not designed to benefit from continuous airflow. If your home has humid pockets, your health may suffer, and your furniture may become damaged. To provide the greatest environment for your family’s health and your possessions’ safety, ensure all the return air vents aren’t blocked. If your unit isn’t eliminating the humidity from the air, then have an air conditioner installation technician inspect and fix it for you.

It Saves You Energy and Money

Your HVAC system uses a consistent input-to-output ratio from supply air vents to the return air vents to measure airflow in CFM. The HVAC will consume the same power whether you leave open or closed vents. You can maintain this CFM ratio and reduce the operating costs of your air conditioning system by keeping all your return vents open, not impeding airflow, and also having many points of entry for air to move your home. So, when you have an air conditioner installation, ask your technician to install multiple vents.

What Can Happen Whenever the Air Vents Are Blocked?

Whether you are trying to provide cooled air to the rest of your home faster by blocking the air vents in the rooms that aren’t occupied or shutting them because you think the room is too cold, blocking the return or supply vents isn’t the solution. Closing the venting system means changing the air pressure. Your heating and air conditioning system does not have a sensor that tells it you have closed the vents. Hence, it will keep sending the same volume of air. The increase in pressure could result in cracks and fractures that mean high energy utility bills, necessitating a call to your air conditioner installation professional for repair.

Ensure You Have Multiple Return and Supply Vents

Vents play a critical role in how your Cypress, TX home is cooled or heated. Ensure that the professional places vents during an air conditioner installation. For an AC installation, maintenance, or repair service, contact us at Mr. Reliable Heating & Air.

Photo By Jason Kolenda at Shutterstock

Air conditioner installation services in Cypress, TX are in high demand. They provide you with outstanding value by providing you with a reliable source of cool air throughout the summer. When you turn on your air conditioner for the first time after having it installed, you’ll be reminded why you chose to hire a company to do the work for you in the first place. It can be extremely beneficial for you to have a climate-controlled home, especially in a place like Texas which is hot and humid.

This guide makes it easier for you to locate a company that does AC installation services so you can hire it right away. You know what to expect from the expense and take the time needed to get the project scheduled with an AC installation company that you’ve gotten to know and trust. You have plenty of chances to reach out to the service techs that complete this type of project and ask questions so you know what to expect during the various stages of the project as they take place.

What Makes an HVAC Company Outstanding to Work With?

If you haven’t had an opportunity to work with an HVAC company before today, now is the time to start looking for one to give your business to immediately. You don’t want to be without a way to keep your home cool. That’s why having access to an HVAC company is imperative. You want to get the new air conditioner installed by a company that cares about you and your well-being.

Here are some of the reasons why air conditioner installation services in Cypress, TX are outstanding in every way:

  • They provide you with peace of mind and comfort. Get the help that you need with your new air conditioner so you can keep a house that looks and feels its best. You provide a safe and comfortable environment for everyone inside the home, including your pets. Air conditioner installation services allow you to beat the heat no matter how unbearably hot it gets outdoors. You’ll enjoy your cool and comfortable home no matter what the heat index reads each day.
  • They alleviate the workload for you. Rather than attempt to do the installation yourself and damage your property or harm yourself and others, you contact a professional to take care of the task for you. What you’re able to achieve in a short amount of time is incredible. It makes it much easier for you to enjoy a climate-controlled environment when you invest in air conditioner installation services and have the AC installed correctly. You’ll come to depend on your new AC as the temperatures rise and the humidity outdoors becomes unbearable.
  • They ensure that everything works correctly. Before the service tech leaves the home, they make sure that the AC is operating efficiently. They check the control panel to ensure that the read-out is correct. They test the AC to see if it cools the rooms of the home quickly and reliably. Having an air conditioner installation service company doing the work for you is highly beneficial. They can easily fix an issue if they run across one while completing the installation for you.
  • They provide you with warranties and guarantees. Keep your air conditioner running for longer with the right protections in place. Thanks to the information provided to you at the point of purchase, you’ll have warranties and guarantees in place that keep you and your household nice and cool for the long haul. You won’t be concerned about your new AC quitting prematurely because you’ll have written protections in place to remedy the situation if there is an issue. Reaching the manufacturer of the air conditioner or the company that installed it for you is easy. You can submit a claim and have them make good on their word to provide you with outstanding customer service.
  • They give you access to a company you can contact for maintenance and repairs. If you need work done on the AC in the future, you’ll know who to reach out to that day. You’ve got plenty of reasons to call the air conditioner installation service provider because you’re aware of how well they’ve worked for you in the past. You can get help quickly and reliably because you’ve already taken the time to get to know the company that you’re calling for assistance.

As you can see, there are many reasons why you would want to reach out to a professional that has expertise with air conditioner installation. The company that you choose to hire can be one to handle all of your air conditioning needs throughout the year. From replacing filters to inspecting the systems to ensure they’re working properly, you’ve got options. That’s why you should be very selective in who you choose to hire to do the work on your air conditioner for you.

There are many companies that offer air conditioner installation services. Finding the one company that goes out of its way to give you what you need is imperative. You’re guaranteed to be happier because you decided to work with the company instead of another that was less qualified or customer-focused. You get the highest level of service available because you decided to choose the right company to give your business to that day.

Keep Your Cool This Summer with Mr. Reliable Heating & Air

Contact Mr. Reliable Heating & Air in Cypress, TX today to discuss the cost of air conditioner installation services. Our phone number is 281-617-2234. We’re here to assist you with your new air conditioner by ensuring that it’s installed and working correctly. Beat the Texas heat by contacting us today to take care of this task for you!

We take the time to get to know you well. That way, you’re well-versed in what you need to do next to get your air conditioner running. Mr. Reliable Heating & Air makes recommendations based on what we’ve learned about you, your home, and your lifestyle. Purchasing the right air conditioner and having us install it gets you one step closer to being entirely comfortable with your decision.

Photo By Victor Yarmolyuk at Shutterstock

At least three-quarters of homes in the United States have air conditioners. Most people fail to window shop and research about ACs before purchasing and installing them; thus, they end up with systems that can’t meet their cooling demands.

With the numerous types and models of air conditioners, it can be challenging to get the best fit to provide temperature-related coolness and comfort. You might need help selecting a unit for accurate air conditioner installation while considering the following factors.

Size

The first essential aspect that HVAC specialists can recommend is to get a suitable-sized unit that better meets your needs. If you are not conversant with AC units, you can get a technician to walk you through the different sizes, calculate the dimensions of the space you intend to cool and help pinpoint the correctly sized unit. Proper sizing is imperative to correct air conditioner installation and the efficiency of the equipment.

An undersized system cannot adequately remove humidity, increases utility bills, and shortens the life of your equipment. If you get an air conditioning system that is too large, it decreases the life of your unit through frequent wear and tear. It also increases discomfort due to humidity because of a failing dehumidifier.

For that reason, you should employ an air conditioning service expert to help in the purchase and connection process to avoid the constant on-and-off cycles and continuous running.

Energy Consumption

The U.S Energy Information Administration (EIA) explains that air conditioning accounts for almost 12 percent of energy consumption in the country. The high energy use of air conditioners in households is a concern for most homeowners, making utility bills a factor to consider before and during air conditioner installation. Before making your final purchase decision, you should factor in the energy efficiency of the AC.

With the help of an HVAC contractor, you will get an air conditioning unit with the correct EER ratings and ENERGY STAR label. Those with available space in their yards can go for the thermal air conditioners because of their high efficiency and lower utility bills. Next, as the specialists in Cypress, TX, start the connection, they can assess your house to check for gaps that can lead to warm and cold spots.

A room with drafty windows can skyrocket your energy bills by allowing conditioned air and heat to escape, making the unit overwork as it cools your home.

Types of AC Units

Another consideration for air conditioner installation is the type of system. Several models and types of ACs, including Smart, thermal, central, hybrid, window, floor-mounted, and heat pumps, require different connection styles. The air conditioning units require technicians who can correctly follow HVAC installation instructions depending on the model for better comfort, quality, and performance.

Quality installation depends on factors such as the location to put the unit. A qualified expert in air conditioner installation understands the AC equipment that should be indoors and the one to install outdoors.

The condensing and compressor should be away from dirty or dusty surroundings and from the alley that allows all the dirty water from floods to enter the AC. Finding an air conditioner installation specialist that can install the complicated and the simple aircon is the beginning of getting the desired cooling outcome.

Additional Components

When installing an AC, you should find out if there are other components to add. It is best to learn all the parts required for setting up the equipment through research or consultations with an expert in air conditioner installation. The add-ons should not be a hassle to install.

For instance, connecting a conventional air conditioning unit might be more straightforward than installing geothermal, hybrid, packaged, and Smart air conditioning equipment because of the additional loops and connection to apps and smartphones for the Smart unit.

Ductwork

If you choose a central air conditioning system that requires ductwork, the HVAC contractor can ensure the proper connection of the ducts. HVAC air ducts are the major contributors to clean, healthy, and fresh indoor air quality to prevent health issues, including allergies. The ducts and vents should have no gaps or openings to allow outside air, rodents, and other pollutants to pollute indoor air quality.

If they are inefficient, they account for a high percentage of air leakage, making them fail to supply sufficient air through the supply ducts. A qualified technician in Cypress, TX, with expertise in air conditioner installation, should start installing ducts after checking the layout of your house to know how to mount them.

The type of the system and the available space for the ductwork are some other essential aspects to bear in mind. They should also correctly seal all the joints and connections to prevent conditioned air from escaping, which can significantly surge your energy bills.

Cost of Installation

Apart from the initial price of buying an air conditioning unit, knowing the cost of the installation process is also crucial. Knowing the amount to pay the installers helps prevent the feeling of being duped when the air conditioner installation company gives you its invoice after they complete its work.

Understanding the price is crucial for budgeting purposes to know how much you will spend purchasing the air conditioning appliance and connections for peak performance. If the contractors give a low price, you might question the quality of their services.

Durability

You do not want to invest in a system that you will have to replace after two to three years because of wear and tear, making it break down fast. A vital factor that adds to the durability of an air conditioner is a correct installation that prevents numerous issues and frequent repairs that can affect its efficiency. So, the best way to avoid making your system wear out fast is by ensuring the setting up of the system is correct and accurate.

Contact Us Today!

Mr. Reliable Heating & Air is one of the reputable companies in Cypress, TX, providing quality AC services such as repairs, maintenance, replacement, and connection. We have a team of skilled, experienced, and licensed HVAC technicians ready and willing to meet your cooling and heating problems. Get in touch with Mr. Reliable Heating & Air today!  

Photo By Victor Yarmolyuk at Shutterstock

The importance of having an air conditioner in your Cypress, TX house cannot be overstated. Without a properly functioning air conditioner, it is hard to imagine how your family would survive the hot summers experienced around here. However, whether you need a new air conditioner for a new building or you would like to replace your old air conditioner, you need to know that the job is quite complex, time-consuming, and physically taxing. Therefore, trying to do it on your own is not advisable, unless you are a professional air conditioning services provider. Therefore, you will need to hire a professional air conditioning installation expert to help you ensure that the job is done correctly and safely. But what exactly might go wrong if you decide to install an air conditioner yourself? Below is a rundown of the reasons why DIY air conditioner installation is a terrible idea.

You Might Choose the Wrong Size of Air Conditioner

Proper air conditioner installation starts with choosing the right air conditioner for a particular home. This is because getting the size wrong could lead to several problems. For example, if you settle for an air conditioner that is too big for your house, it will cool your house so quickly that there will not be enough time for it to get rid of excess humidity. Therefore, although it will cool your Cypress, TX house, it will leave your indoor air feeling sticky. On the other hand, if you pick an air conditioner that is too small, it will need to work extremely hard to cool your home, meaning that it will wear out more rapidly and even consume more electricity. To avoid such problems, you need to engage an air conditioner installation expert from the moment you decide that you need a new air conditioner. The expert will guide you in picking the right air conditioner to maximize your home’s energy efficiency and comfort.

You Might Get Hurt

As mentioned above, air conditioner installation is a physically taxing job. But in addition to getting you exhausted, the job might leave you with serious injuries. For instance, the job might involve handling electrical components, meaning that it might expose you to the risk of electrical shocks or even electrocution. Besides, handling an air conditioner might expose you to the risk of refrigerant poisoning, which is associated with symptoms such as headache, nausea, seizure, shortness of breath, and vomiting. In severe cases, refrigerant poisoning can even be fatal. Therefore, for you and your family to stay safe, you need to avoid DIY air conditioning installation and instead work with a professional heating and air conditioning contractor. Professionals handle such projects regularly, and they have the necessary skills, experience, and training to get the job done without getting anyone hurt. In any case, professional HVAC contractors are insured, meaning that you will not be held financially liable if they get hurt while working in your house.

You Might Damage the Equipment

An air conditioner is an extremely sensitive appliance. Therefore, if you mishandle its installation, you might end up damaging some of its components. This means that you might be forced to start seeking professional air conditioner repair services when your air conditioner is still new. Unfortunately, air conditioning repairs can be quite expensive. As such, by deciding to install an air conditioner on your own, you might end up spending more than you would have spent by simply engaging a professional air conditioner installation expert from the beginning. In other words, you can protect your air conditioning equipment and save a lot of money if you decide to leave the project to professionals. Professionals have adequate training and experience, and they are equipped with everything they need to ensure that the job is done correctly and in a way that does not put the equipment at the risk of getting damaged.

You Might Compromise the Efficiency and Efficacy of Your Air Conditioner

The HVAC system is one of the most notable consumers of energy in your house. However, this does not mean that you should pay more than you need for energy. The good news is that there are several things you can do to minimize your air conditioner’s energy consumption. However, it is worth noting that it all begins with the installation. If your air conditioner installation is not done correctly, it might end up running inefficiently throughout its life. In other words, if you decide to install your air conditioner on your own, you might be forced to accept higher energy bills for many years to come. This means that DIY air conditioner installation can be very expensive in the long run. On the other hand, by working with a professional air conditioner installation expert to install your air conditioner, you can rest assured that the job is done perfectly well. This way, you will ensure that your air conditioner will operate optimally throughout its life as long as it is maintained properly. This will not only save you some money but also ensure that your air conditioner achieves maximum levels of comfort.

The Bottom Line

Overall, it is apparent that if you are planning to have a new air conditioner for your new house or to replace your old air conditioner, you should never be tempted to do the installation on your own unless you are a professional HVAC contractor. This is because many things could go wrong if you decide to do the job with inadequate experience and skills. Instead, you need to ensure that you hire an experienced HVAC contractor to get the job done correctly. If you are looking for a dependable HVAC company providing professional air conditioner installation services in and around Cypress, TX, Mr. Reliable Heating & Air is your best bet. We have been installing air conditioners for many years, and we are a household name in our community. Get in touch with us today to learn more about our company and services.

Photo By Victor Yarmolyuk at Shutterstock

Residents and business owners in The Woodlands, TX, are very familiar with high temperatures throughout the summer months. Air conditioner installation is a task to handle in spring so your household or business is prepared for the rising temperatures just around the corner. Although air conditioner installation may seem like a simple task, this can be a very misleading impression. It’s not unusual to run into all sorts of unexpected problems and complications, and there are so many different types of AC systems that most people aren’t familiar with all of them. Professionals put a lot of time into education and training so they can handle the extensive variety of air conditioning systems on the market.

Try to get your new AC up and running before you need it. Schedule installation as soon as possible. Lots of homes and businesses in The Woodlands, TX, may plan to install a new AC or replace an old unit, so it’s best to avoid the rush when high temperatures and humidity suddenly remind people of the need for air conditioning. You’ll also enjoy peace of mind knowing that an important household task is finished.

Choosing Your New AC

You may need air conditioner installation services because your home or business doesn’t have an AC system, but you may want to consider replacing old units as well. The high-efficiency systems available today can be a huge improvement over units installed 15-20 years ago. Energy efficient units are good for your wallet and good for the environment. An air conditioner installation professional can help you choose a new system and explain the advantages and disadvantages of each system.

Some homeowners are choosing ductless mini-split air conditioners. These units are similar to heat pumps, but they deliver air directly to each room instead of circulating air through a central system. Mini-split AC units tend to be small. They can be installed in walls, floors, or even drop ceilings. A small unit can cool up to four individual spaces, and mini-split systems work very well in small homes, apartments, or home offices.

Energy Efficiency

An air conditioner removes heat from a home’s interior and expels it outdoors. Make this process as easy as possible to improve energy efficiency and reduce wear and tear. Air conditioner installation professionals consider lots of factors, such as choosing a location that gives the unit plenty of space to allow completely unobstructed airflow.

A shaded location is also preferable because direct sunlight forces the AC to work harder to expel hot air outside. It’s best to avoid positioning the unit where the fan has to blow air towards a building or fence, although it isn’t always possible to avoid this situation. Installation technicians also think about the possibility of small animal nests in the outdoor portions of the unit, damage to drain lines, outdoor clutter, and the possibility of dirt or debris accumulating in the unit. Some of these factors are unavoidable, but planning ahead can make maintenance much easier and help maximize the lifetime of your new air conditioner.

Evaporator units produce condensation, and the amount of condensate varies according to humidity levels. Hot, humid weather can lead to a surprising amount of water in your AC unit’s drain pan. If the water doesn’t drain properly, you could end up with bacteria, mold, or algae growing in stagnant water. Blocked drain lines are a common cause of standing water, but the position of your unit is important too. Air conditioner installation technicians try to install the unit in a position that lets gravity encourage draining.

Professional air conditioner installation may save you a lot of time and aggravation in the future. Proper installation can avoid common pitfalls that lead to broken parts and repairs. A professional can help you choose an AC system that fits your household size and specific conditions so the unit won’t be under constant strain from overwork. Efficiency doesn’t just reduce energy use, it also reduces wear and tear on mechanical components, fans, belts, and other parts. You can reduce the risk of emergency repairs even more by scheduling regular maintenance for your HVAC system.

Peace and Quiet

New AC systems are also less noisy than older models. Quiet operation is a significant advantage for many households, especially those with light sleepers. Proper installation contributes to quiet operation too. An AC technician can install the unit pedestal in an ideal position to minimize vibrations and help you find an ideal location away from bedrooms. Noise from window units may be affected by nearby buildings and fences as well. A quiet AC combined with sealed ducts and a well-insulated home can result in a peaceful indoor environment because most noise from the outside is muffled as well.

Choosing a new AC with the help of an air conditioner installation professional is very beneficial if you plan to sell your The Woodlands, TX, home at some point. A new and efficient central air system is a definite plus for most prospective buyers in The Woodlands, TX, so you can increase the value of your home and enjoy a comfortable atmosphere.

Appropriate Sizing

Size is one of the most important considerations for whole-house air conditioner installation. An appropriately sized unit is efficient and keeps the house comfortable. Even if you’ve determined a proper size for your AC in the past, don’t forget to take any changes, such as expansions or remodeling projects, into account. Choosing the right size is also essential for controlling humidity. A unit that’s too large may waste energy, while a unit that’s too small may struggle to keep temperatures down and remove enough moisture from the air to keep the house comfortable. The size of your unit also depends on the type of air conditioning system you choose.

Ductwork and Ventilation

The duct system in a residential home or commercial building is extremely important for efficient heating and cooling. Ducts should be clean and tightly sealed to avoid wasting energy and maintain desired indoor temperatures. If the air in certain rooms seems to be overly warm, the problem could be a damper blocking the flow of cool air to that room. Any obstruction can interfere with airflow, which means blocked rooms can’t be maintained at proper temperatures.

Air conditioner installation technicians can also check duct work, adjust airflow, clean ducts and the rest of the ventilation system, and repair leaks that could lead to air pressure leaks. Intake and outtake vents are common problem areas because beds, furniture, and other household objects can easily block airflow. This is a problem at intake valves too because obstructions make it much more difficult for the system to draw in and circulate air. This is a task that homeowners may find challenging because ducts are frequently located in inconvenient locations, such as attics, crawl spaces, and other out-of-the-way places.

As an added benefit, duct cleaning also removes mold spores, pet dander, dust, pollen, and other debris that accumulates over time. Removing airborne allergen irritants improves the air quality in your home in The Woodlands, TX, which can be very beneficial for people with allergies or respiratory conditions such as asthma or COPD.

Airflow Evaluation

Air conditioner installation may involve airflow evaluation. Technicians measure the flow of air in different rooms with specialized meters. These tools let technicians pinpoint problems without crawling through every inch of ductwork, so they can find a solution quickly. This type of evaluation is especially useful when there are no obstructions or obvious issues in problem rooms that don’t stay at a uniform temperature. Infrared imaging devices are very useful tools that let technicians evaluate insulation and monitor hot and cold air. These devices work well for troubleshooting to verify gradual temperature changes and find problems such as uninsulated ducts, air leaks, and blockages. Air conditioner installation professionals aren’t just available for the initial installation, they can also address performance issues without taking the entire system apart.

Refrigerant

Your air conditioner installation provider can also handle refrigerant testing. Signs of a refrigerant leak include hissing noises, a sweet smell, or visible moisture leaking from the unit. You may not notice a leak right away because they can be very small and the level of coolant decreases gradually. Warm air coming from your AC unit may be the first noticeable sign, but you can avoid this eventuality by having a professional install and maintain your AC system.

There are rules and regulations for refrigerants as well, so it’s best to let a certified technician with proper equipment take care of refills, disposal, and leaks. Low coolant levels can damage the compressor and other components of the AC unit too, so finding and fixing leaks early can save a lot of trouble in the future. Some types of coolant in older air conditioner models aren’t used anymore, so that’s also an issue you’ll need a professional to fix.

Smart Thermostats

Many homes with existing AC systems in The Woodlands, TX, have ducts running through the residence already. Typical designs frequently have separate sections for bedrooms, living rooms, dining rooms, kitchens, and other spacious rooms within the home. This is convenient if one area of the home isn’t used frequently. It lets you shut off cooling for that room to avoid wasting energy, although this only works if your duct system and the room itself are tightly sealed.

Advanced thermostats, or ‘smart thermostats,’ are great tools for improving efficiency and comfort whether your home has a duct system or not. A programmed smart thermostat can adapt to temperature changes, recognize preferred settings, and anticipate household needs without micromanagement. Wireless thermostats are also exceptionally useful because you can control the temperature of your home from a smartphone or laptop no matter where you are. For example, you can let the system know when you’re on vacation or a business trip so the house isn’t cooled unnecessarily.

Smart thermostats integrated into a smart home system can also coordinate features such as window shades or blinds, seasonal changes, time of day, and weather forecasts to manage AC systems and improve energy efficiency. Your air conditioner installation technicians can help you program the thermostat and determine optimal settings, although you may need to tweak settings over time as you learn the best way to use the device.

Preparing For Air Conditioner Installation

You can take steps to prepare for air conditioner installation to help the process go as smoothly as possible. Make sure the area around the intended installation spot is clear of furniture, curtains, toys, pet bowls, or any other type of clutter. It’s always a good idea to clean the area first as well. An initial consultation to choose your new AC should have provided the exact size of the unit and the space necessary for installation. Try to clear hallways or rooms that technicians need to travel through. The less obstacles in the way, the better.

Push furniture against the wall or move it to another room to minimize obstacles. Roll up rugs and secure wires running across the floor or along walls to avoid tripping hazards. It may be a good idea to keep children and pets in another part of the house during installation as well. This helps air conditioner installation technicians concentrate on their work without accidental interference. Remember that several people may be moving through the home at once during installation and plan accordingly.

Call Mr. Reliable Heating & Air for air conditioner installation throughout The Woodlands, TX. The experts at Mr. Reliable Heating & Air have the right tools, education, and experience for air conditioner installation and maintenance. They can also help you choose an appropriate AC system for your home or business, and technicians are always available to help with heating and cooling issues.

Photo By Antonio Guillem at Shutterstock

A new air conditioning system is a major investment in your home’s comfort and even its value. Professional air conditioner installation is crucial to ensure that your new system functions properly. When you contact Mr. Reliable Heating & Air for AC installation at your Cypress, TX, home, you may hear us mention the term ‘tonnage.’ What does it mean and why is it so important when it comes to AC system installation?

Shopping for an AC Unit

Before you purchase a new air conditioning system, you need to understand the term tonnage. Unless you happen to be an HVAC technician, you probably don’t hear this term come up often–or ever–in conversation. Tonner is the cooling capacity of an air conditioning system. It’s important for anyone purchasing an AC unit to select one with the proper tonnage for their interior square footage. If you buy and install a unit without the right tonnage, your unit is going to be taxed–and its longevity is seriously affected. Proper air conditioner installation always involves checking the tonnage to ensure that it’s the ideal capacity for cooling the space in question. 

Air Conditioning Tonnage: What You Should Know

Air conditioning techs refer to thermal units as BTUs. One BTU is equivalent to the heat that one candle produces. This is the same amount of heat that is required to raise one pound of water’s temperature by just one degree. How does this relate to your air conditioner installation at your home? Well, the cooling capacity of the AC unit refers to the rate of heat transfer that’s needed to freeze one ton (or 2,000 pounds) of water during a period of 24 hours. The term tonnage describes this cooling capacity. 

When it comes to an air conditioning system’s tonnage, it has to be just right in order to cool your home properly. If you choose a system with the wrong tonnage for your air conditioner installation, you’re going to have serious problems. For instance, if you install an AC unit that doesn’t have enough cooling capacity to cool the square footage of your house, the AC system will have to work overtime to continually try to meet that temperature setting on your thermostat. As hard as it works, it will struggle to meet the mark. 

An overtaxed AC system is one that’s prone to breakdowns and reduced longevity. Proper air conditioner installation means choosing a unit that has the correct tonnage. Conversely, some people may think that more is better when it comes to AC system tonnage. That’s a problem too. 

If you install an air conditioning system that has more tonnage than necessary to cool your house, you’re going to draw more energy to run this larger system than you actually need. This will mean that your energy bills will likely skyrocket. But that’s not the only problem when the tonnage is too much for your square footage. When the AC system is too large, it will become prone to short cycling. Short cycling isn’t good for your unit and will eventually lead to an increase in wear and tear on its parts. Again, you’re looking at more maintenance and repairs as well as reduced AC system longevity. 

How Do I Know the Right Tonnage for My Space?

A good place to begin your search for the right tonnage for your new AC unit is with your last AC unit. If it cooled your home effectively during its tenure and didn’t experience undue problems, its tonnage was likely right. You can find the unit’s tonnage by looking at the label secured to your outdoor unit. Most units list cooling capacity in BTUs. Look at the label and divide its BTUs by 12,000 to find the tonnage. If the system measures 36,000 BTUs, the tonnage for the unit is three tons. 

If your unit is missing this label, don’t worry. You can contact our air conditioner installation pros to help. We will look up the make and model of your unit. We can determine its tonnage from that information. 

How Do I Find Out the Tonnage I Need Based on Square Footage?

If you’re installing an AC unit for a new home or simply don’t know the tonnage of the previous unit, you can figure it out another way. If your house has 2,000 square feet, you should shop for an AC system with a 5-ton cooling capacity–typically. However, there are more factors at play when choosing an AC system. Square footage is just one factor. The material the home is made of can affect the system’s cooling capacity. The condition of windows and home installation can also impact tonnage concerns.

Mr. Reliable Heating & Air for Professional AC Installation

Before you go shopping for a brand new air conditioning system for your Cypress, TX, home, call Mr. Reliable Heating & Air for a consultation and to schedule your air conditioner installation. We can help you select the ideal energy-efficient AC unit with the correct tonnage for your house based on all those important factors we mentioned above. It’s extremely important to choose a unit with the right tonnage for your space as well as to install the unit with flawless precision. 

Customers in and near Cypress, TX, choose Mr. Reliable Heating & Air for our experienced air conditioner installation as well as our AC repair and maintenance solutions. Our HVAC technicians are highly trained and stay up to date with the latest AC products to enter our industry. We can help you choose the right model for your house and budget. We also offer skilled heating services. If you need air conditioner installation for new construction or simply want to replace your aging unit, call us today.

Photo By Rana X at Shutterstock

Air conditioning is essential to escape the summer heat, and there are different types of air conditioners to choose from. Many people have window units in one or more windows, which will keep the rooms cool but aren’t the most convenient option. There are several downsides to window units, including:

  • They must be installed at the beginning of the cooling season and removed before the heating season. This can be challenging because window units are heavy and time-consuming if you have multiple window units.
  • You need a considerable amount of space to store the units when they’re not installed.
  • Window units are designed to cool one room, and you’ll need to keep the doors closed when the AC runs. If you’re cooling an area without a door, such as the kitchen and living room, you’ll need to hang a sheet or blanket in the doorway to keep the room cool.
  • You can’t open the window on an unseasonably cool day if there’s an AC in the window.

If you’re tired of the hassle with window units, you should consider a central air conditioner installation; there’s no need to install or remove the unit, and storage space is unnecessary. Also, the unit will cool every room in the house without keeping the doors closed. Finally, if there isn’t a unit in the window, you can open the windows anytime.

If you plan to install central air in your home, there are a few things you need to consider.

#1 Your Budget

You need to create a budget before an air conditioner installation to know how much money you can spend. When creating the budget, you have to consider the cost of the unit, the labor, and the cost of installing new ductwork or repairing or replacing the existing ductwork.

If you’re not sure how much the labor and ductwork will cost, a professional in air conditioner installation in The Woodlands, TX, can help.

#2 The Size of the Unit

The size of the unit you choose is an essential factor to consider before an air conditioner installation, and there are two sizes to consider. The first is the physical size of the unit. You have to measure the area where you plan to install the indoor unit and compare it with the unit’s dimensions. If the air conditioner doesn’t fit, you’ll need to find a smaller one or another space to install it.

Next, you have to consider the size of your home. If you choose a unit that’s too large for your home, it will cycle frequently and won’t reduce the humidity in your home. If you select a unit that’s too small for your home, it will have to work harder to keep your home cool, resulting in higher energy bills.

If you’re unsure which size air conditioner is best for your home, an air conditioner installation professional can help.

#3 Energy Consumption

You need to consider the amount of energy your new air conditioner will consume before an air conditioner installation. The last thing you want is for your new air conditioner to cause your energy bills to skyrocket, and the EER rating can help you choose the best unit. EER ratings range from 8.5 to 14, and the higher the number, the less energy the unit will consume when it runs. Units with high EER ratings are more expensive than units with lower EER ratings, and you’ll need to choose a unit that will fit your budget. A professional in air conditioner installation in The Woodlands, TX, can help you select a unit that won’t cause a significant increase in your energy bills and will work with your budget.

#4 Quality

When choosing a suitable unit for your home, you must consider quality. Low-quality units are less expensive but often require more repairs and tend to have shorter lifespans, costing you more money over time. The initial cost of higher-quality units will be more expensive, but the unit will require fewer repairs and will last longer than a low-quality unit.

#5 Compressor Installation

You have to select the right spot in your yard for the compressor to prevent issues in the future. It’s best to install the compressor in a shaded area to prevent the sun from beating down on the unit. When the compressor gets too hot, it can overheat and stop working, and the air conditioning system won’t produce cold air. You also want to choose an area where there are no shrubs or plants close by that can grow toward the compressor and obstruct the fan.

If you’re having trouble selecting the right location, a professional in air conditioner installation in The Woodlands, TX, can help you choose the best location.

Why Choose Mr. Reliable Heating & Air?

If you’re planning a central air conditioner installation, the professionals at Mr. Reliable Heating & Air can help. We are a full-service HVAC company, and our techs are installation experts. They are professionally trained and skilled and have the knowledge and experience to handle any HVAC job, regardless of how complex.

We’ve been in this business long enough to know that HVAC problems can arise at the most inconvenient times and that some issues must be fixed immediately, so we provide emergency service. If you have an emergency HVAC issue, we’ll get tech to your home as quickly as possible to resolve the problem.

With costs of just about everything on the rise today, we try our best to make our services as affordable as possible and have money-saving coupons on our website. You can also join our White Glove membership which will save money on our services. You can become a member for $8.25 per month or $99 per year, and the membership entitles you to 15 percent off standard pricing, a free tune-up on your heating and cooling systems, priority scheduling, and a one-hour appointment time frame.

To schedule an appointment for any HVAC service, give Mr. Reliable Heating & Air a call today.

Photo By fizkes at Shutterstock

You should consider replacing your old air conditioner with a new one for several reasons, including frequent malfunctioning and low efficiency. Besides efficiency, can an old air conditioner harm your health and well-being? What could happen if your air conditioner goes unused for a long time? Is there a way to know that your air conditioner is properly installed? This article explores the importance of replacing your old air conditioner with a new one.

Investing in a new, modern air conditioning system in The Woodlands, TX, can significantly improve your home’s cooling and heating needs. After having an air conditioner installation service, you should meticulously follow a maintenance plan to ensure that the unit can serve your home for a long time. On the other hand, ignoring AC maintenance often will result in uneven cooling patterns, continuous blower operations, loud noises, dirty filters, and numerous leaks.

Are Old Air Conditioners Safe to Use?

During the execution of their duties, HVAC professionals face a lot of questions surrounding the state of the air conditioning unit. One of the frequently asked questions is whether an air conditioning system or unit is safe for use in its present state. If an air conditioner shows extreme wear and tear, it exposes you to various risks. An AC unit in poor condition is also more expensive to run, has high chances of breakdown, and is less efficient. However, it also can be dangerous to your health if you continue using an old air conditioner with obvious wear and tear. Hence, should your air conditioner be too old, it might be time to start considering a new air conditioner installation.

Hazards Associated with Using Old Air Conditioners

Unchecked Bacterial Growth

The air conditioners naturally become a breeding ground for fungi, bacteria, and other forms of microbes. The process by which the hot air is cooled naturally results in condensation and moisture. Although the air conditioner has mechanisms for handling the condensate, things are different for an old air conditioner.

New air conditioners feature condensate drains and drain pans where all the water produced is channeled and later directed to the plumbing. These components may be defective or damaged in old air conditioning units. This means it will do a bad job, resulting in dark, damp interiors ideal for bacterial and mold growth. To avert this hazard, enlist an air conditioner installation to replace the old AC unit.

Fire

Outdated and worn components might not meet the current fire safety standards. Degraded wiring and faulty fans could result in air conditioning fires. A report by the National Fire Protection Association released in 2017 about domestic fires revealed that air conditioners were responsible for about 2800 fires every summer between 2011-2015. Although this might seem a small number, it points to faulty air conditioners posing a significant risk. Thus, it is advised that you have an air conditioner installation service in The Woodlands, TX to replace your aged air conditioning unit.

Volatile Chemicals

Do you still use an old air conditioner? Have you checked the refrigerant that the unit uses? Old air conditioning units might still use toxic and ozone-depleting refrigerants such as R-22. However, this coolant has been off the shelf since 1st January 2010. It has been replaced by a more energy-efficient refrigerant which is also highly eco-friendly. Hence, if your AC is over 12 years old, you might have to replace it since it doesn’t use modern, efficient refrigerant. If unsure, have an air conditioner installation technician check your unit and replace it if it is using R-22 refrigerant.

Respiratory Issues

Using old air conditioning units has been linked to decreased air quality. As a result, the residents have a prevalence of respiratory issues. If your home has a person with a pre-existing respiratory condition such as asthma, they might see an increase in asthma flare-ups. You might notice that your family members are experiencing other conditions, such as coughing and sneezing. Therefore, have an air conditioner installation technician replace the AC unit to ensure that your family members having pre-existing conditions are protected.

What Can Happen if the AC Unit Is Not Used for a Long Time

Suppose you have gone without switching on your air conditioner for an extended period. You might wonder whether it is safe to turn it back on or whether any precautions or necessary maintenance are needed. The main air conditioning unit might have been packed in and awaiting repair. Hence, you might decide to get your old AC unit from your garage and plug it in in the meantime.

When it is safe to use an old air conditioning unit depends on several factors. For how long has your air conditioner been dormant? Is the unit in great condition? If the unit is unused for several months, the unit may be in a perfect state and can be used as a stand-in as you wait for a new air conditioner installation. However, take the precautions below:

Service the AC unit: Has the air conditioner undergone any inspection or tune-up within the last several months? If you know it hasn’t, you better have an air conditioner installation professional inspect its key parts.

Check the compressor: You should clean the unit of any dirt. Further, clear any debris and dust that might have accumulated around the outdoor compressor before turning on your old air conditioning unit.

Use fan mode: If you decide to use the old AC, start it on fan-only mode to prevent dust or debris accumulation before using it as a cooling device. Run it on fan mode for about 10 minutes to evaluate whether running it on a fully operational capacity is safe.

Replace That Old AC Unit

Has your air conditioning unit seen better days? Maybe it is time to replace it to ensure that your home is sufficiently cooled during the summer. For a reliable air conditioner installation in The Woodlands, TX, contact our professionals at Mr. Reliable Heating & Air.

Photo By Brian A Jackson at Shutterstock

If you’re in the market for a new air conditioner, you’re probably wondering how the installation process works. Luckily, air conditioner installation experts at Mr. Reliable Heating & Air have put together a list of tips to help make the process as smooth as possible! Keep reading for more information.

A. Plan Ahead

Planning is key when it comes to any home improvement project, and that includes air conditioner installation. When you know you’ll be getting a new air conditioner, start doing your research early to make an informed decision about which unit is right for your home. This will also give you time to budget for the project. Planning entails the following:

Know the Type of Air Conditioner You Need

When it comes to air conditioners, there are a few distinct varieties to select from. The most popular form of air conditioner is a central air conditioner, which is frequently utilized in homes with forced-air heating. This is the best option for you if you have a duct system in your home.

Other types of air conditioners include window units, portable air conditioners, and mini-split systems. Window units are typically used in small spaces or in homes that don’t have ductwork. Portable ACs can be moved from one room to another, making them a good option for those who want flexibility. Mini-split systems are similar to central ACs but don’t require ductwork.

Choose the Right Size Unit

Once you know what type of air conditioner you need, you’ll also need to choose the right size unit. This is critical since an AC that isn’t big enough will be unable to adequately cool your house, and an AC that is too large will consume more energy than necessary. To determine the right size, air conditioner installation experts typically use a home’s square footage as a guide. However, there are other factors to consider, such as the type of windows in your home and the number of people who live there.

B. Prepare the Area for Installation

The next step for air conditioner installation is to prepare the area where the unit will be installed. Preparing the area includes:

Clearing out the space: Before the installation team arrives, clear the space where the unit will be installed. This means removing any furniture or other items that might get in the way.

Cleaning the area: Once the space is clear, give it a good cleaning. This will help ensure that your new air conditioner has a clean surface to sit on.

Ensure the area is level: It’s also important to ensure that the surface where the AC will be installed is level. This will help ensure that the unit operates correctly and doesn’t vibrate too much.

If you’re not sure how to prepare the area for air conditioner installation, don’t hesitate to ask for help from air conditioner professionals in Cypress, TX.

C. Schedule an Installation Date

Once you’ve chosen your air conditioner and prepared the area for installation, it’s time to schedule an installation date. It’s best to do this in advance to ensure the installer will be available when you need them.

When you’re scheduling the installation, be sure to ask about any other preparations you need to make. For example, some air conditioning units require an electrical outlet, so you’ll need to ensure one is available. You should also ask about any permits that might be required in your area. In addition, it’s a good idea to schedule the installation for a time when you’ll be home. This way, you can answer any questions the installer might have.

D. Installation Day

On installation day, the installers will first bring the unit into your home and set it in the prepared space. Once the unit is in place, they’ll connect it to the electrical outlet (if necessary) and begin installing the ductwork.

The air conditioner installation process can take a few hours, but it will vary depending on your unit type and the complexity of your ductwork. How long it will take also depends on the size of the team working on the project. The skills and experience of the AC installation team will also count. Therefore, you need to hire a reputable installation company in Cypress, TX, to avoid any issues.

E. After Installation

After the installation is finished, the installer will test the equipment to verify it’s functioning properly. They’ll also show you how to use it and answer any questions you have. You should also receive a user manual containing information on operating the unit.

F. Enjoy Your New Air Conditioner!

After your air conditioner is installed, you can enjoy the cool, comfortable air it provides. You should keep an eye on it to ensure it’s operating correctly. If you notice any problems, be sure to contact the installer right away. You should also schedule regular maintenance appointments to keep it running smoothly. This way, you can enjoy your air conditioner for years to come.

With these tips, you can be sure that your air conditioner installation will go smoothly and without any problems. You should engage an AC installation professional throughout the process to be sure it’s done correctly. If you fail to do so, you may end up with an inefficient or even dangerous unit. Don’t take chances when it comes to your air conditioner installation – follow these tips and enjoy a cool, comfortable home for years to come.

We Are Best When It Comes To Dealing With Air Conditioners!

If you’re looking for an air conditioner installation company in Cypress, TX, Mr. Reliable Heating & Air is the company for you. We have years of experience installing all types of air conditioners and are always up-to-date on the latest technology. We also offer a 100% satisfaction guarantee on all our air conditioning services. Contact us today to schedule a free consultation. We will help you choose the right home unit and install it quickly and efficiently.

Photo By Maks_lab at Shutterstock

The average lifespan of an HVAC system in the United States is 14 years. However, this lifespan isn’t cast in stone and could be longer or shorter, depending on your maintenance practices. So how do you get the most out of your new air conditioner? Here are some tips on what to do and what not to do after air conditioner installation in Cypress, TX. 

Change the Filters Regularly

While an HVAC technician should check the air filters during maintenance visits, this task is up to the homeowner as well. Many homeowners use either a 30-day or 90-day filter. Check the filter you use regularly and replace it as required. If the filters are too dirty, replace them, even if it’s ahead of schedule. A dirty air filter means the HVAC system must work harder to cool down your house. Ensure you follow the replacement schedule for the filter chosen after air conditioner installation. 

Make Use of the “Auto” Fan Setting

Most air conditioners have two fan settings. The “auto” setting instructs the fan to run 

only when the system is cooling the house. The “on” setting instructs the fan to run continuously. The” on” setting has several advantages, like helping trap more pollutants and contaminants, but it isn’t recommended at all times. This setting will force the air conditioner to work harder, wearing it down and shortening its lifespan. Take advantage of the “auto” setting to ensure your system lasts longer.

Open All Vents

When your energy costs are high, you may be tempted to close vents in rooms not in use to save money. The issue with this is that the air conditioner will still try to cool the entire house and use more energy to distribute air if the vents are blocked. For maximum efficiency, talk to an HVAC technician during air conditioner installation about a zoning system. With multiple zones, you can apply a higher temperature to unused spaces and ensure your air conditioner lasts longer. 

Schedule Regular Maintenance

The best way to extend the lifespan of your air conditioner is to schedule annual maintenance. Your air conditioner should be inspected, cleaned, and tuned up annually. Spring is an excellent time to have your air conditioner serviced so the system can be in good shape to combat the summer heat. 

Maintenance usually includes inspection, cleaning, checking coolant levels, replacing filters, and other tasks that ensure the HVAC system is functioning as efficiently as possible. Schedule annual tuneup sessions after air conditioner installation to ensure you get the best results from your system. 

Invest in a Smart Thermostat

Your cooling needs change according to the time of day. Here in Cypress, TX, the hottest period is usually noon, and the heat builds up after that. If you keep adjusting the thermostat according to the outdoor temperature, the system will not function efficiently. However, leaving the thermostat at the same temperature all day wastes energy. A smart thermostat will allow you to program it to apply cooler air during certain hours, saving energy and reducing the strain on your system. Try to find the right balance between outdoor temperature and indoor conditions. Ask an HVAC technician to set up a smart thermostat for you during air conditioner installation to get maximum efficiency from your AC.

Check the Condenser

The condenser can be found outside. It is built to withstand harsh outdoor conditions like severe weather and windblown debris. Ensure you check on the condenser periodically and clear away any vegetation and rubble close to it. Roots of trees and other vegetation planted too closely can damage the condenser. The condenser needs room to breathe. Ensure you ask the HVAC technician to point out the condenser during AC installation if you are unsure what it might look like. 

Check on the Insulation

Your system will last longer after air conditioner installation if it doesn’t have to run constantly. Insulation is critical in keeping your home cool during summer. If your home has insufficient insulation, the air conditioner will have to work harder to keep your home at the optimal temperature. Check the insulation in the attic to ensure cool air is not escaping. Adding insulation in the basement and the walls will also help keep cool air inside the house. 

Get Timely Repairs

Have you noticed any issues with your air conditioner? Are you noticing an increase in your utility bills? If this is the case, it may be time to call an HVAC technician for repairs. Issues are normal after air conditioner installation. However, the longer you wait to get your system repaired, the worse the issue gets. By calling the professionals at the first sign of trouble, you minimize the damage to your air conditioner, keeping repair costs low. 

Keep the Sun Away!

A bright sunny morning can be very uplifting. However, while it’s tempting to open the curtains to brighten up your home or office, doing so will raise the temperature, causing your air conditioner to work harder. To improve the effectiveness of your system, close all curtains and blinds during the day. You can also buy a solar screen that can deflect sun heat and lower your cooling costs. 

Ensure the Unit Installed Is the Right Size

During air conditioner installation, it is important to ensure the AC unit is the correct size. To do this, the HVAC technician will perform a load calculation. If the wrong size is installed, it will lead to faster wear and tear. For instance, if the AC unit is too small, it will have to work harder to maintain the desired temperature. As such, it will have to run regularly, leading to wear and tear. On the other hand, if the system is too big, it will achieve the desired temperature too quickly, resulting in constant cycling, causing moisture problems and extra wear and tear. 

Get Professional AC Services You Can Rely On

At Mr. Reliable Heating & Air, we feature various sizes and types of air conditioners designed to meet your cooling needs while saving you money. In addition, our technicians are thoroughly trained on the various air conditioners so they can advise you on the best brand and model for your home. Contact us today to schedule an appointment for quality air conditioner installation in Cypress, TX.

Photo By Lost_in_the_Midwest at Shutterstock

Air Conditioner Repair Spring, TX