One of the most common complaints that heating and air companies deal with is the complaint about a furnace not providing sufficient heat in the winter. One might think that this typically would mean that the furnace will need to be replaced, but this is not always the case. Oftentimes, it could be something as simple as the thermostat is malfunctioning and it will need to be replaced or even repaired. Other times, it could simply be that the furnace could use a fresh new filter or even a good clean-out and some maintenance might do the trick.
The Furnace Air Filter
One of the most forgotten about components in a furnace is the air filter. There are many routes a homeowner can take in order to help them remember when to change out the air filter but it will require the homeowner actually doing the task rather than putting it off. One way is to always to it on the first day of the month. Another simple method would be setting a monthly notification reminder in a smart phone so that you are notified when it is time to change out the filter. Even if you suspect that the filter does not need to be changed out every month, it is still a good idea to inspect the filter and make sure everything looks A-OK.
Whenever there is a dirty furnace filter it can be extremely harmful to the components that make up a furnace. It can also dramatically affect the performance of the furnace also. On top of all of this if that wasn’t enough, dirty filter scan also shorten the life span of the furnace. With all of that in mind, you can see just how important it is to make sure that the filter is exchanged on a frequent basis. A heating and cooling nit that is deprived of sufficient airflow will need to work overtime in order to provide adequate conditioned air and this will bring about high stress on the system which can cause it to prematurely fail and in worst case scenarios it could even start a fire.
Additionally, dirty air filters that are not changed out will make the furnace itself dirty. Which in turn will require professional cleaning in order to get the furnace back in tip-top shape. In the end, making sure that you exchange the filters for the furnace each month makes much more sense than risking destroying a multi-thousand-dollar appliance or possibly burning your house down.
The second most important bucket list for your home’s furnace is ensuring that it receives maintenance at least once per year. A clean, well-tuned furnace will operate as intended and as optimally as can be. Not only this but it will work much more efficiently and the life cycle for the system can be extended longer than the suggest life cycle for the system is. When it comes to maintenance there is much more than just cleaning the system. It will also include oiling the components to ensure that there is less friction which will help the components last longer. Other parts of annual maintenance will include inspections, such as, checking the combustion chamber for signs of cracks and the electrical connections for loose connections, damaged or faulty wiring. When parts begin to wear out, they will eventually cause a system to cease to function as intended or cease to function at all. With annual maintenance a lot of these problems can be caught before they become a problem that can happen at the most inconvenient of times or cause further damage.
Furnace maintenance is recommended at a minimum of once per year by a professional and certified technician that deals with heating and AC in Katy, TX. When you hire a professional technician to inspect and maintain your furnace, they will be able to detect any problems before they cause the possibility of system failure or repairs that could cost much further down the road. Annual inspections will also ensure that your investment is maintained at its peak capabilities and efficiencies.
Another thing that you should inspect yourself or have inspected when you have a technician dealing with your heating and AC in Katy, TX, is the insulation in your home. When you have adequate amounts of insulation, it will of course keep your home warm and toasty during the winter. If you do the inspection yourself, then you should check in the attic first and see if the ceiling joists are visible. If so, you will need to add more insulation. Insulation will also lose its density over time and will eventually need to be replaced entirely.
Additionally, the guidelines for insulation will change every now and then. At the time insulation was placed in your home it may have been up to code, but that might have changed over time. If your home appears to be cooling faster than it used too after your furnace cycle shuts off then you should inspect the insulation in your home. Also, make sure you inspect for air leakage from your home’s windows, doors, and plumbing.
About Cypress Heating and Air Conditioning
Cypress Heating and Air Conditioning has been helping homeowners and businesses alike in Katy, Texas and surrounding areas for many years with heating and AC in Katy, TX. We are one of the leading heating and air companies in the area. Dedication, determination and professional services that you can rely on have helped made us the go to source for customers in the area who are in need of heating and cooling repairs, installations and maintenance. When you contact Cypress Heating and Air Conditioning in Katy, Texas you can rest assured knowing that you are receiving high quality professional heating and AC in Katy, TX that is both reliable and affordable.
Cypress Heating and Air Conditioning in Katy, Texas is a leader in the HVAC field servicing Katy, Plano, and surrounding areas. Our NATE certified technicians provide professional HVAC related services, installation and repairs. If you are looking for help with your home or business’ HVAC system and need heating and AC in Katy, TX do not hesitate to give us a call today. One of our professional technicians will be more than happy to assist you and schedule a service call for heating and AC in Katy, TX at your earliest convenience. Cypress Heating and Air Conditioning is a proud member of the BBB and maintains a rock solid A+ rating.