You live in a two-story house, but you like staying on the ground floor, as staying on the second floor has become unbearable. For some reason, the ground floor is hotter than the ground floor. What’s the deal and how can you fix this? If the hot air continues to rise with the second floor being the worst, the problem lies with your heating and cooling system.
You will have to contact a professional HVAC technician for heating and AC repair in Katy, TX. What could have led to this drastic change in temperature between the ground floor and second floor? That is what you are going to find out.
Here is a list of major factors responsible for the varying temperatures between the two floors of your home:
1. The Heating and Cooling System
You may need to replace your heating and cooling system, as it might be past its due date. The average lifespan of a HVAC system is 15 to 20 years. Each year you run your heating and cooling system, its lifespan decreases and little by little and it begins to lose its efficiency. If you are unsure on whether your HVAC system requires an upgrade, contact heating and AC repair in Katy, TX to inspect it.
One of the reasons why you may need to replace your HVAC system is because of its inability to cool the entire house. A licensed HVAC technician with training will visit your home to perform a detailed inspection of your heating and cooling system to determine if you need to replace it or if it requires minor repairs.
If you do not need to replace it, the reason you are facing problems with it is because you may have overlooked routine maintenance. Perhaps, there is a broken component that requires replacement. Moreover, the load calculation could be off, which results in you investing in a too small HVAC system. You can narrow down the problem by contacting a HVAC technician for heating and AC repair in Katy, TX.
2. The Ductwork
If you have placed your HVAC system at a great distance from your second floor, the cool air has to pass a lot of ductwork before it can reach it. Leaks and gaps in the network of ducts can also result in the cool air not reaching the rooms on the second room.
Leaky ductwork is due to the substandard installation of the heating and cooling system, which is why you need to contact an experienced HVAC technician for HVAC system installation and heating and AC repair in Katy, TX.
You can inspect some sections of the ductwork yourself, such as in the attic and basement. If you find leaks in the ductwork, there could be in places you cannot easily access. You should call a heating and AC repair in Katy, TX to seal the leaks and close the gaps. The HVAC technician will perform a pressure test to determine how leaky the ductwork is and then work to repair it from the inside.
3. The Attic
You need to insulate your attic to prevent hot air from getting into your house through the ceiling. Insulting your attic will keep hot air in and out during winters and summers, respectively. If you need to insulate your attic, you can contact a heating and AC repair expert in Katy, TX.
They will visit your home to inspect and insulate your attic. The HVAC technician can better guide you on insulating your attic and recommending energy-efficient products to ensure your heating and cooling system cools both the ground floor and second floor.
4. Young Trees
Even though this is not an issue with all homes, it can be an issue if small trees surround the ground floor. These trees provide you with protection from the sun, but only on the ground floor, as the second floor is exposed to direct sunlight.
You will have to wait several years for these young trees to grow and provide shade to the second floor of your house from the outside as well. However, that can take a long time. Instead of waiting for these young trees to grow, you can upgrade your window treatments such as getting blackout curtains, heavy drapes, and reflective shades.
If you still see no change in the temperature, you need to contact a professional and trained HVAC technician for heating and AC repair in Katy, TX. They will visit your home to inspect your heating and cooling system and diagnose it. It is important that you do not neglect this issue, but take action as soon as you find out that your heating and cooling system is not cooling the second floor of your home as well as it is cooling the ground floor.
In a two-story, there is a temperature difference of 8 to 10 degrees between the ground floor and second floor. The reason for this is that heat moves from lower to higher levels, thus leaving the rooms on the second floor warmer than on the ground floor. Moreover, most HVAC systems only monitor the temperature around one thermostat, hence leaving other rooms away from it or above it without cool air.
The issue with having one thermostat to control the temperatures of your house is that when it reaches the desired and specified temperature, it turns off the heating and cooling system to prevent it from overheating.
Even if the entire home is not evenly cool, the HVAC system will still turn off. Instead, you can install zoning systems to regulate the temperature independently from each thermostat installed on both ground floor and second floor.
The zoning system will tell the dampers to open and close when the individual thermostats have reached the desired temperature. If you think the issue is not with the thermostat, but with the heating and cooling system, contact a HVAC technician for heating and AC repair in Katy, TX.
If you cannot pinpoint the problem or think it is another issue completely, contact Cypress Heating and Air Conditioning for heating and AC repair in Katy, TX.