Tonnage: What It Is And Why It Matters For Air Conditioner Installation | Cypress, TX

Tonnage: What It Is And Why It Matters For Air Conditioner Installation | Cypress, TX

A new air conditioning system is a major investment in your home’s comfort and even its value. Professional air conditioner installation is crucial to ensure that your new system functions properly. When you contact Mr. Reliable Heating & Air for AC installation at your Cypress, TX, home, you may hear us mention the term ‘tonnage.’ What does it mean and why is it so important when it comes to AC system installation?

Shopping for an AC Unit

Before you purchase a new air conditioning system, you need to understand the term tonnage. Unless you happen to be an HVAC technician, you probably don’t hear this term come up often–or ever–in conversation. Tonner is the cooling capacity of an air conditioning system. It’s important for anyone purchasing an AC unit to select one with the proper tonnage for their interior square footage. If you buy and install a unit without the right tonnage, your unit is going to be taxed–and its longevity is seriously affected. Proper air conditioner installation always involves checking the tonnage to ensure that it’s the ideal capacity for cooling the space in question. 

Air Conditioning Tonnage: What You Should Know

Air conditioning techs refer to thermal units as BTUs. One BTU is equivalent to the heat that one candle produces. This is the same amount of heat that is required to raise one pound of water’s temperature by just one degree. How does this relate to your air conditioner installation at your home? Well, the cooling capacity of the AC unit refers to the rate of heat transfer that’s needed to freeze one ton (or 2,000 pounds) of water during a period of 24 hours. The term tonnage describes this cooling capacity. 

When it comes to an air conditioning system’s tonnage, it has to be just right in order to cool your home properly. If you choose a system with the wrong tonnage for your air conditioner installation, you’re going to have serious problems. For instance, if you install an AC unit that doesn’t have enough cooling capacity to cool the square footage of your house, the AC system will have to work overtime to continually try to meet that temperature setting on your thermostat. As hard as it works, it will struggle to meet the mark. 

An overtaxed AC system is one that’s prone to breakdowns and reduced longevity. Proper air conditioner installation means choosing a unit that has the correct tonnage. Conversely, some people may think that more is better when it comes to AC system tonnage. That’s a problem too. 

If you install an air conditioning system that has more tonnage than necessary to cool your house, you’re going to draw more energy to run this larger system than you actually need. This will mean that your energy bills will likely skyrocket. But that’s not the only problem when the tonnage is too much for your square footage. When the AC system is too large, it will become prone to short cycling. Short cycling isn’t good for your unit and will eventually lead to an increase in wear and tear on its parts. Again, you’re looking at more maintenance and repairs as well as reduced AC system longevity. 

How Do I Know the Right Tonnage for My Space?

A good place to begin your search for the right tonnage for your new AC unit is with your last AC unit. If it cooled your home effectively during its tenure and didn’t experience undue problems, its tonnage was likely right. You can find the unit’s tonnage by looking at the label secured to your outdoor unit. Most units list cooling capacity in BTUs. Look at the label and divide its BTUs by 12,000 to find the tonnage. If the system measures 36,000 BTUs, the tonnage for the unit is three tons. 

If your unit is missing this label, don’t worry. You can contact our air conditioner installation pros to help. We will look up the make and model of your unit. We can determine its tonnage from that information. 

How Do I Find Out the Tonnage I Need Based on Square Footage?

If you’re installing an AC unit for a new home or simply don’t know the tonnage of the previous unit, you can figure it out another way. If your house has 2,000 square feet, you should shop for an AC system with a 5-ton cooling capacity–typically. However, there are more factors at play when choosing an AC system. Square footage is just one factor. The material the home is made of can affect the system’s cooling capacity. The condition of windows and home installation can also impact tonnage concerns.

Mr. Reliable Heating & Air for Professional AC Installation

Before you go shopping for a brand new air conditioning system for your Cypress, TX, home, call Mr. Reliable Heating & Air for a consultation and to schedule your air conditioner installation. We can help you select the ideal energy-efficient AC unit with the correct tonnage for your house based on all those important factors we mentioned above. It’s extremely important to choose a unit with the right tonnage for your space as well as to install the unit with flawless precision. 

Customers in and near Cypress, TX, choose Mr. Reliable Heating & Air for our experienced air conditioner installation as well as our AC repair and maintenance solutions. Our HVAC technicians are highly trained and stay up to date with the latest AC products to enter our industry. We can help you choose the right model for your house and budget. We also offer skilled heating services. If you need air conditioner installation for new construction or simply want to replace your aging unit, call us today.

Photo By Rana X at Shutterstock